These parameters are for editing the individual Parts that make up a Performance.
To switch between the display for Parts 1 - 4 to which the internal Voices are assigned and the display for Plug-in Parts (PLG1 - 3) to which the
Plug-in Voices are assigned, press the [F6] button.
nWhen a Plug-in Voice is assigned to a Part of the selected Performance, some parameters may not be available depending on the installed Plug-in board.
[SF2] INS SW (Insertion Switch)The Insertion Effects can be applied to up to eight Parts. This display lets you set to which Parts the Insertion Effects
are applied.
[SF3] PLG-EF (Plug-in Effect)This display lets you set the Plug-in Insertion Effect related parameters when the Effect Plug-in Board PLG100-VH
has been installed to this synthesizer. For details on each parameter, refer to the Owner’s Manual included with the
PLG100-VH.
[SF4] REVERBThe number of parameters and values available differs depending on the currently selected effect type. For more
information, see the Effect Type List in the separate Data List booklet.
[SF5] CHORUS
Part Edit[PERFORM] → Performance selection → [EDIT] → Part selection
[F1] VOICE
[SF1] VOICE
PartSw (Part Switch)Determines whether each Part is on or off. Since a Performance can consist of up to four Parts, you can select four
Parts from Parts 1 - 4 and the Plug-in Parts 1 - 3.
Settings:on, off
BankDetermines the Voice Bank (page 60) for each Part.
For details about the Plug-in Voice Bank, refer to the Owner’s Manual included with your Plug-in Board.
nWhen the cursor is located on the Bank, you can select a Voice via the way explained on page 60.
NumberDetermines the Voice Program number for each Part.
For details about the Plug-in Voice Program number, refer to the Owner’s Manual included with your Plug-in Board.
[SF2] MODE
Mono/PolyDetermines the playback method of the Voice for each Part — monophonic (single notes only) or polyphonic
(multiple notes).
Settings:mono, poly
nThis parameter is not available for the Part to which a Drum Voice is assigned.
ArpSwitch (Arpeggio Switch)Determines whether Arpeggio is on or off for the currently selected Part.
Settings:on, off
[SF3] LIMIT
NoteLimitH (Note Limit High)Determines the lowest and highest notes of the keyboard range for each Part. Each Part will only sound for notes
played within its specified range.
Settings:C -2~G8
nIf you specify the highest note first and the lowest note second, for example “C5 to C4,” then the note range covered will be
“C-2 to C4” and “C5 to G8.”
nYou can set the note by pressing the keyboard while holding the [INFORMATION] button.
NoteLimitL (Note Limit Low)
VelLimitH (Velocity Limit High)Determines the minimum and maximum values of the velocity range within which each Part will respond. Each Part
will only sound for notes played within its specified velocity range.
Settings:1~127
nIf you specify the maximum value first and the minimum value second, for example “93 to 34,” then the velocity range covered
will be “1 to 34” and “93 to 127.”
VelLimitL (Velocity Limit Low)
[SF4] PORTA (Portamento)Determines the Portamento parameters for each Part. Portamento is used to create a smooth transition in pitch from
the first note played on the keyboard to the next.
SwitchDetermines whether Portamento is on or off.
Settings:off, on
TimeDetermines the pitch transition time. Higher values mean longer transition times.
Settings:0 ~127
ModeDetermines the Portamento mode.
Settings:fingr (fingered), full (full time)
fingr (fingered).........Portamento is only applied when you play legato (playing the next note before releasing the previous one).
full (full time).............Portamento is always applied.
nThe Mode setting is not available for the Plug-in Part.
nThese Portamento parameters above are not available for the Part to which the Drum Voice is assigned.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.