530341
115
Zoom out
Zoom in
Previous page
1/240
Next page
Quick GuideConnecting the MO to external devices
Using the MO with computer software
115
Owner’s Manual
Using the Remote Control functions
The REMOTE display appears, and the panel controls are enabled for Remote operation of the computer software (their
normal functions are disabled).
n Press this button again to exit from the Remote Control mode.
Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [DAW REMOTE] button.
The following explains which sequencer functions are assigned to which panel controls in the remote control.
n For details about how to operate the Editor, refer to the PDF manual included with the Editor.
[J], [F], [I], [ IE], [G], [H] buttons
The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.
[EDIT], [JOB], and [STORE] buttons
[ARPEGGIO ON/OFF] button
1
To enter the Remote Control mode, press the [DAW REMOTE] button (the lamp flashes).
2
Select the software to be remote-controlled (Mode A or Mode B).
3
Use the Knobs and buttons on the MO to remotely control the software.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic
Control.
When the Mode is set to “SONAR” These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.
When the Mode is set to “D.Perf These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the
Mackie Control.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “SONAR” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “D.Perf The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.
DAW
REMOTE
FILE UTILITY
DEMO
F6
DAW
REMOTE
Mode A Mode B
PAN SEND
TONE
ARP FX
EQ
ASSIGN
MEF
These dark bars serve as the cursor, indicating the
track/part currently being edited by the Knob.
Moving the slider automatically moves the cursor to
the corresponding track/part.
Press the Control function button to
change the functions assigned to the
[F1] – [F6] and [SF1] – [SF5] buttons
(shown at the bottom of the display).
Refer to the separate Data List.
Upper row indicates the setting
values for knobs/sliders 1 – 4 on
the DAW controller.
Bottom row indicates the setting
values for knobs/sliders 5 – 8 on
the DAW controller.
The functions of the buttons on each DAW controller are assigned to
the [F1] – [F6] and [SF1] – [SF5] button on the MO. The functions to
be assigned depend on the software selected in the Mode A or B.
For details, refer to the “Remote Control Assignments” on page 117.
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info