530341
117
Zoom out
Zoom in
Previous page
1/240
Next page
Quick GuideConnecting the MO to external devices
Using the MO with computer software
117
Owner’s Manual
Remote Control Assignments
When controlling Multi Part Editor/SQ01 V2
Functions of 01X assigned to [F1] – [F6] and [SF1] – [SF5]
buttons
Checking the Remote Control assignments
If you’re unsure as to which software function has
been assigned to a particular panel control on the
MO, this convenient feature lets you quickly check it
from the display.
1 In the Remote Control mode, press the
[INFORMATION] button to call up the
information display, indicating the function of
the last pressed button.
2 Press the button for which you want to check
the assignment.
This display shown above appears when you
press the [F] (Play) button. In this way, you
can check each button’s control assignment
simply by pressing it.
3 Press the [INFORMATION] button again to
return to the Remote Control mode.
n While the Information display is shown, the panel buttons
cannot be used to control the computer software.
Demo display in Remote Control function
If the connection settings are not appropriate, the
demo display (below) will be shown. If this happens,
check the MO settings and DAW settings as
described on page 113.
Button/Controller names
on 01X
Functions
In all modes:
[DISPLAY UP]
[DISPLAY DOWN]
Changes the parameter to be edited.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE] Changes the meter display mode.
[ON] (in the normal status)
Tur ns each channel off or on (mutes/unmutes the signal).
[SHIFT] + [ON] of the Master
Channel (in the normal
status)
Tur ns all the channels including the Master Channel off or on
(mutes/unmutes the signal).
[SHIFT] + [ON] of each
channel (in the normal status)
Tur ns all the channels with the exception of the Master
Channel off or on (mutes/unmutes the signal).
[ON] (with the [SOLO] lamp
turned on)
Tur ns the Solo function of each channel on or off (applies to
the Channel Module/Software Synthesizer Module)
[SHIFT] + [ON] (with the
[SOLO] lamp turned on)
Tur ns the Solo function of each channel on or off (applies to
the Channel Module/Software Synthesizer Module)
[SOLO] Changes the function of the [ON] button to the Solo function.
[SHIFT]+[SOLO] Determines the Solo/Mute settings of the selected tracks in
the Track View window.
[SHIFT]+[REC RDY] Turns track recording on or off.
[AUDIO] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Channel Module software.
[INST] Starts the Audio Mixer or moves the Audio Mixer Window to
the front of the computer screen. This button operation
applies to the Software Synthesizer Module.
[MIDI] Starts the MIDI Editor (such as the Multi Part Editor) or moves
it to the front of the computer screen.
SF1
F1 F2 F3 F4 F5 F6
SF2 SF3 SF4 SF5
F1 F2 F3 F4 F5 F6
SF1 SF2 SF3 SF4 SF5 INFORMATION
PAGE1
FADER BANKS
PAN/SEND
PAN/SEND
TONE
MIXER/LAYER
ARP FX
PAGE2
EQ
TONE
TONE
ARP FX
ARP FX
EQ
SEND
PA NDYNAMICS EFFECT BANK-L BANK-R SHIFT
GROUP NAME/VALUE DIAL RESET KN1-4/5-8
FLIP
SOLO REC/RDY BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
INST
AUDIO MIDI OTHER BANK-L BANK-R SHIFT
AUX/BUS NAME/VALUE DIAL RESET KN1-4/5-8
EQ LOW
SEL CH EQ LOW-MID EQ HIGH BANK-L BANK-R SHIFT
EQ HIGH-MID NAME/VALUE DIAL RESET KN1-4/5-8
F5
F1 F2 F3 F4 SHIFT
F6 F7 F8 KN1-4/5-8
BANK-L BANK-R SHIFT
NAME/VALUE DIAL RESET KN1-4/5-8
CURSOR-L
CURSOR-DWN
CURSOR-UP ZOOM BANK-L BANK-R SHIFT
CURSOR-R SCRUB DIAL RESET KN1-4/5-8
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info