530341

Yamaha MO8 Manual

114
Zoom out
Zoom in
Previous page
1/240
Next page
Quick Guide Connecting the MO to external devices
Using the MO with computer software
114
Owner’s Manual
If you turn the power off without storing, the currently edited settings
will be lost.
Never attempt to turn off the power while an “Executing...” or “Please
keep power on” message is shown. Turning the power off in this state
may cause the system to freeze and prevent normal startup the next
time the power is turned on, as well as resulting in the loss of all user
data.
Set the Port setting for remote control on the software,
referring to the illustration in step 4.
Specific instructions for setting up your particular software
follow. For instructions on how to start the software, refer to
the documentation included with the software.
■ Cubase SX 3
1 Pull down the [Devices] menu and select [Device
Setup] to call up the “Device Setup” window.
2 Click the [+] button and add “Mackie Control.”
3 Select “Mackie Control” from the popup list.
4 When setting the Port to “4,” for example, in step 4 of
“Setting up for Remote Control,” set the MIDI Input to
“YAMAHA USB IN 0-4” and the MIDI Output to
“YAMAHA USB OUT 0-4.”
n The functions of buttons on the Mackie Control are assigned to the
buttons of the MO, with the exception of UserA and UserB
(FootSw) which are not supported by the MO.
■ SONAR 4
1 Pull down the [Options] menu and select [MIDI
Devices] to call up the “MIDI Devices” window.
2 When setting the Port to “4” for example in step 4 of
“Setting up for Remote Control” add “YAMAHA USB IN
0-4” to the “Inputs” and add “YAMAHA USB OUT 0-4”
to the “Outputs.”
3 Pull down the [Options] menu and select [Control
Surfaces] to call up the Control Surface window.
4 Click the “[+] button, select “Mackie Control,” then set
the Input Port to “YAMAHA USB IN 0-4” and the Output
Port to “YAMAHA USB OUT 0-4” (for example, when
setting the Port to “4” in step 4 of “Setting up for
Remote Control”).
■ Digital Performer 4.52
1 Pull down the [Setup] menu and select [Control Surface
Setup] to call up the “Control Surface” window.
2 Click the [+] button.
3 Select “Mackie Control” in the Driver section.
4 In the box for setting “Unit” and “MIDI,” select “Mackie
Control” in the “Unit” section and select the MIDI port in
the “MIDI” section.
■ Logic Pro 7
When turning on the power of the MO before starting
Logic:
1 Start Logic on the computer, then turn on the power of
the MO.
2 Start Logic on the computer.
Logic automatically recognizes the MO as Logic
Control and performs the required settings.
When starting Logic before turning on the power of the
MO:
1 Start Logic on the computer, then turn the power to the
MO on.
If you have already set the software to be controlled to
“Logic” in the Utility mode, you need not perform step 2
because Logic automatically recognizes the MO when
this step is performed.
2 Set the software to be controlled to “Logic” in the Utility
mode, then enter the Remote Control mode.
Logic automatically recognizes the MO and performs
the required settings.
5
Press the [ENTER] button to execute the
settings.
6
Press the [STORE] button to store the settings
as the system settings of the Utility mode.
7
Start the software to be remote-controlled,
and make the MIDI settings and remote control
settings.
CAUTION
CAUTION
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info