462455
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
MG124CX/MG124C Owner’s Manual
Front & Rear Panels
Reference
Master Control Section
1 2TR IN Jacks
These RCA pin jacks can be used to input a stereo sound
source. Use these jacks when you want to connect a CD
player directly to the mixer.
You can adjust the signal level using the 2TR IN con-
trol in the Master Control section.
2 REC OUT (L, R) Jacks
These RCA pin jacks can be connected to an external
recorder such as an MD recorder in order to record the same
signal that is being output via the STEREO OUT jacks.
The mixer’s STEREO OUT Master Fader has no
affect on the signal output via these jacks. Be sure to
make appropriate level adjustments at the recording
device.
3 RETURN L (MONO), R Jacks
These are unbalanced phone-jack type line inputs. The signal
received by these jacks is sent to the STEREO L/R buses and
the AUX (AUX1) bus. These jacks are typically used to
receive the signal returned from an external effect device
(reverb, delay, etc.).
These jacks can also be used as an auxiliary stereo
input. If you connect to the L (MONO) jack only, the
mixer will recognize the signal as monaural and will
send the identical signal to both the L and R jacks.
4 SEND Jacks
•AUX (AUX1)
This is an impedance balanced* phone-jack type output. This
jack outputs the signals from AUX (AUX1) bus. You can use
this jack, for example, to connect to an effect unit, cue box,
or other monitoring system.
EFFECT (AUX2)
This is an impedance balanced* phone-jack type output that
outputs the signal from the EFFECT (AUX2) bus. You can
use this jack, for example, to connect to an external effect
unit.
5 STEREO OUT (L, R) Jacks
These jacks deliver the mixer’s stereo output. You can use
these jacks, for example, to connect to the power amplifier
driving your main speakers. You can also connect these jacks
to a recording device when you wish to record mixer’s stereo
output while using the STEREO OUT Master fader for level
control.
XLR jacks
XLR-type balanced output jacks.
LINE jacks
TRS phone-jack type balanced outputs.
6 GROUP OUT (1, 2) Jacks
These impedance-balanced* phone jacks output the Group
1/2 signals. Use these jacks to connect to the inputs of a
multi-track recorder, external mixer, or other such device.
7 MONITOR OUT Jacks
Connect these stereo phone-jack outputs to your monitor sys-
tem.
The signal output by these jacks is determined by the
MONITOR switch, the 2TR IN switch, and the PFL
switches on the input channels.
F
G
B
H
C
0
9
A
D
E
5
8
1
3
2
7
64
MG124CX
* impedance balanced
Since the hot and cold terminals of impedance balanced
output jacks have the same impedance, these output
jacks are less affected by induced noise.
NOTE
NOTE
NOTE
NOTE
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MG124C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG124C in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info