462455

Yamaha MG124C Manual

12
Zoom out
Zoom in
Previous page
1/24
Next page
12
MG124CX/MG124C Owner’s Manual
Reference
Front & Rear Panels
The following applies to both the MG124CX and MG124C. In cases where different features need to be described for each
model, the MG124CX feature will be described first, followed by the MG124C feature in brackets: MG124CX (MG124C).
Channel Control Section
1 MIC Input Jacks (CHs 1 to 4, 5/6, 7/8)
These are balanced XLR-type microphone input jacks
(1:Ground; 2:Hot; 3:Cold).
2 LINE Input Jacks (CHs 1 to 4)
These are balanced TRS phone-jack line inputs (T:Hot;
R:Cold; S:Ground).
You can connect either balanced or unbalanced phone plugs
to these jacks.
3 LINE Input Jacks (CHs 5/6 to 11/12)
These are unbalanced phone-jack stereo line inputs.
4 LINE Input Jacks (CHs 9/10, 11/12)
These are unbalanced stereo RCA pin jacks.
Where an input channel provides both a MIC input
jack and a LINE input jack, or a LINE input jack and
an RCA pin jack, you can use either jack but not both
at the same time. Please connect to only one jack on
each channel.
5 INSERT Jacks (CHs 1 to 4)
Each of these jacks provides an insert point between the
equalizer and fader of the corresponding input channel (CHs
1 to 4). The INSERT jacks can be used to independently con-
nect devices such as graphic equalizers, compressors, or
noise filters into the corresponding channels. These are TRS
(tip, ring, sleeve) phone jacks that carry both the send and
return signal (tip = send/out; ring = return/in; sleeve =
ground).
Patching external devices via an INSERT jack
requires a special insert cable such as illustrated
below (insert cable sold separately).
6 GAIN Control
Adjusts the input signal level.
To achieve the best balance between S/N ratio and dynamic
range, adjust the level so that the PEAK indicator
9 lights
only occasionally and briefly on the highest input transients.
The –60 to –16 scale is the MIC input adjustment range. The
–34 to +10 scale is the LINE input adjustment range.
ON
1
2
5
6
8
A
C
D
E
H
I
9
0
7
B
F
G
ON
1
6
A
C
D
E
H
I
9
0
3
7
B
F
G
ON
A
C
D
E
H
I
0
3
4
B
F
G
Channels
9/10 and 11/12
(Stereo)
Channels
1 to 4
(Monaural)
Channels
5/6 and 7/8
(Stereo)
MG124CX
The signal output from the INSERT jacks is
reverse-phased. This should not be a problem
when connecting to an effect unit, but please be
aware of the possibility of phase conflict when
connecting to other types of device.
NOTE
NOTE
To the input jack of the
external processor
To the output jack of the
external processor
Sleeve (Ground)
Tip: OUT
Tip: IN
To the INSERT I/O jack
Sleeve (Ground)
Sleeve (Ground)
Ring: IN
Tip: OUT
CAUTION
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MG124C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG124C in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info