29781
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
Linear time tape counter
Use the linear time tape counter as an aid in locating a point
on a tape (–99 min. 59 sec. to 99 min. 59 sec.). To set the
counter reading to "0:00", press the COUNTER RESET
button.
Note: Precision of counter
The tape counter is not a clock, and so there will be some
errors in the time display compared to the actual playing
time (this cannot be avoided, as a suitable method is
adopted to provide a time display not only during recording
and playback, but also during fast forward and rewind).
The error depends on the type of tape being used.
Tape remain indicator
The tape remain indicator shows the remaining length of the
loaded tape to be played back.
When the playback reaches the end of the tape, the leftmost
digit of the tape remain indicator blinks.
Note:
The tape remain indicator may differ depending on the tape
length, tape type or the size of hub. So, use this indicator as
an aid to recognize the remaining length of the tape to be
played back.
Notes on the monitor function
During playback, the deck automatically selects the tape
monitor mode. (The TAPE indicator lights.) If the monitor
mode is switched to the source monitor mode by pressing
the MONITOR button, no sound is heard. (The SOURCE
indicator lights.)
During playback, be sure to set the MONITOR button so that
the TAPE indicator lights.
L
R
dB
–30 20 15 10 8 6 4 0 2
Ÿ
46
+
SOURCE
REC
TAPE
TAPE TUNING
I/NORM II/HIGH IV/METAL
MPX FILTER
Ÿ
B C
PLAY TRIM
Display during playback
When high frequencies
are too loud, attenuate
the high frequencies.
When high frequencies are
too soft, boost the high
frequencies.
Peak level meters:
Indicate the peaks of the signal levels during recording and playback over
a –30 dB to +6 dB range. There are separate meters for each left and
right channel. These level meters have a peak hold function which holds
the peak level for about 1.5 seconds. (The peak hold function works in the
level from –10 dB to +6 dB.)
PLAY TRIM control adjustment
When distortion or the absence of high frequencies is
noticeable while playing a tape recorded on another
cassette deck, compensate the high frequency response
with the PLAY TRIM control.
PLAY TRIM
Tape remain
indicator
SOURCE/TAPE
indicators
When a tape is loaded,
the corresponding tape
type indicator lights.
Linear time tape counter
00
–+–+
100
10 dB
1k
10kHz
+
_
1High frequency sound
is too boosted.
2 Flat
3 High-frequency sound
is absent.
3
2
1
Indicates the remaining tape length.
Lights when a tape is loaded.
B/ C indicators
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha KX10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha KX10 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info