29781
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
ENGLISH
Fault
Playback sound is muffled and high
frequencies are inaudible.
When playing back tapes recorded on
other decks, meter deflections are
greater (smaller) than when recording.
Cause
A tape recorded without Dolby NR is
played back with Dolby NR on.
Heads are dirty.
Heads are magnetized.
Basic levels are different for different
cassette decks.
Cure
Playback in OFF position.
Clean heads and carry out
demagnetization with head
demagnetizer.
This is not a fault.
SPECIFICATIONS
Track Configuration ....................4 track, 2 channel stereo
Motor ........................................... DC servo motor (capstan)
DC motor (reel)
DC motor (tray)
Head ........................................... Recording: hard permalloy
Playback: hard permalloy
Erase: double-gap Ferrite
Rapid Transport............................................ 95 sec. (C-60)
Wow and Flutter
W.RMS .................................................... less than 0.05%
W.Peak.................................................. less than ±0.08%
Signal-to-Noise Ratio
(Dolby NR off) ......................................better than 60 dB
(Dolby B NR on) .................................. better than 68 dB
(Dolby C NR on) .................................. better than 76 dB
Frequency Response
Normal tape (–20 dB) ................... 20 - 17,000 Hz ±3 dB
High (CrO2) tape (–20 dB)............ 20 - 18,000 Hz ±3 dB
Metal tape (–20 dB) ...................... 20 - 20,000 Hz ±3 dB
Harmonic Distortion
Normal tape ............................................. less than 0.8%
High (CrO2) tape ...................................... less than 0.8%
Metal tape................................................. less than 0.8%
Input Sensitivity/Impedance
Line .................................................... 100 mV/50 k-ohms
Output Level
Line ................................................... 570 mV/2.2 k-ohms
Channel Separation (1 kHz)...................................... 40 dB
Cross Talk (125 Hz) ................................................... 55 dB
GENERAL
Power Supplies
Europe model .............................................230 V, 50 Hz
U.K. model and Australia model .............. 240 V, 50 Hz
General model ................. 110/120/220/240 V, 50/60 Hz
Power Consumption ...................................................16 W
5 W(POWER OFF)
Dimensions (W x H x D) .....................280 x 119 x 360 mm
(11 x 4-11/16" x 14-3/16")
Weight ..................................................4.8 kg (10 lbs. 9 oz.)
Accessories
Connecting cords ......................................................... 2
* Specifications subject to change without notice.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha KX10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha KX10 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info