REMOTE CONTROL UNIT
1 Power Key
Turns this unit on and off.
* (Europe model only): Turns the POWER on mode to the
STANDBY mode and vice versa.
2 Program Select Keys (1 through 16)
Select DSP programs 1 through 16.
3 Test Switch
When pressed, sends a signal to the main left, center, main
right, and rear effect speakers in turn for easy comparison of
level settings.
4 Set Menu/Parameter +/– Keys
Edit DSP program parameters, make settings/adjustments in the
SET MENU mode, or used in the main/center/effect speaker level
balance adjustment.
5 Effect On/Off Key
Cuts off the sound’s output from the rear effect and center
speakers. To restore the output from those speakers, press this
key again.
6 Set Menu/Parameter Select Keys
Select DSP program parameters or titles of settings/adjustments
in the SET MENU mode, or used in the main/center/effect
speaker level balance adjustment.
7 Tape Monitor Switch
Used when you have connected the tape deck to this unit’s
TAPE terminals to select that tape as the source. (See pages
12 and 24.)
8 Master Volume +/– Keys
Increase (+) or decrease (–) the master volume level.
20