Manual Yamaha DSP-E580 (page 21 of 38) (English)

557281

Zoom out

Zoom in

1/38

1 Power Switch

* STANDBY Mode (Europe model only)

While the power is on, pressing the POWER key on the remote

control unit switches the unit to the STANDBY mode. (In this

mode, the indicator is half illuminated.)

2 Remote control sensor

Signals from the remote control unit are received here.

3 Display Panel

Shows program names, parameters and information about other

various settings and adjustments.

4 PRO LOGIC Indicator

Illuminates while the built-in Dolby Pro Logic Surround Decoder is

being activated.

5 DSP Indicator

Illuminates while the built-in Sound Field Processor is being

activated.

6 Program Selector

Sequentially selects the digital sound field processing

programs in the + or – direction.

7 Effect Switch

Normally ON, this switch can be turned OFF to disable output

from the center and effect speakers so that the sound

becomes normal 2-channel stereo.

8 Tape Monitor Switch

Used when you have connected the tape deck to this unit’s

TAPE terminals to select that tape as the source. (See page 12

and 24.)

9 Master Volume Control

Simultaneously controls signal level at all outputs: main, rear

effect, center, and subwoofer. (This does not affect TAPE REC

OUT level.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-E580 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha DSP-E580 Manual

Product: