48728
75
Zoom out
Zoom in
Previous page
1/84
Next page
75
Appendix
2. SYSTEM MESSAGES
System messages are the data related to the overall system of the device.
2.1 System Exclusive Messages
System Exclusive messages control various functions of the CS2x,
including master volume and master tuning, tone generator mode,
effect type and various other parameters.
2.1.1 General MIDI Mode On
When General MIDI mode on is received, the tone generator mode
will be changed to XG mode.
When this happens, the CS2x will receive the MIDI messages
which are compatible with GM System Level 1, and consequently
will not receive NRPN and Bank Select messages.
Since approximately 50ms is required to execute this message, be
sure to leave an appropriate interval before the subsequent
message.
F0 7E 7F 09 01 F7 (Hexadecimal)
2.1.2 Master Volume
When received, the Volume MSB will be effective for the System
Parameter.
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
* mm(MSB) = appropriate volume value, ll(LSB) = ignored
2.1.3 XG System On
When this data is received, the CS2x will switch to XG mode and
all the parameters will be initialized accordingly, and XG-
compatible messages such as NRPN and Bank Select messages can
be received.
Since approximately 50ms is required to execute this message, be
sure to leave an appropriate interval before the subsequent
message.
F0 43 1n 4C 00 00 7E 00 F7 (Hexadecimal)
*n = device number
TG300B Reset
F0 41 1n 42 12 40 00 7F 00 41 F7 (Hexadecimal)
*n = device number
2.1.4 Performance Mode On
F0 43 1n 63 50 00 06 03 F7 (Hexadecimal)
*n = device number
2.2 Active Sensing
Once FE (Active Sensing) has been received, if no MIDI data is
subsequently received for longer than an interval of approximately
300msec, the CS2x will perform the same function as when All Sounds
Off, All Notes Off, and Reset All Controllers messages are received, and
will then return to a status in which FE is not monitored.
Refer to the MIDI Data Format in the “Data List” book for more
information on the various messages.
1.2.24.2 Reset All Controllers (Control #121)
The values of the following controllers will be reset to the
defaults.
1.2.24.3 All Notes Off (Control #123)
Clears all notes currently on for the specified channel.
However, if Hold1 or Sostenuto is on, notes will continue
sounding until these are turned off.
1.2.24.4 Mono (Control #126)
Performs the same function as when an All Sounds Off message
is received, and if the 3rd byte (mono number) is in the range
of 0 - 16, sets the corresponding channel to Mono Mode (Mode
4 : m = 1).
1.2.24.5 Poly (Control #127)
Performs the same function as when an All Sounds Off message
is received, and sets the corresponding channel to Poly Mode
(Mode 3).
1.3 Program Change
Messages which determine which voice to select for each Part.
With a combination of Bank Select, you can select not only basic voice
numbers, but also variation voice bank numbers.
1.4 Channel Aftertouch
Messages which let you control the sounds by the pressure you apply to
the keys after the initial striking of the keys, over the entire channel.
1.5 Polyphonic Key Pressure
Messages which let you control the sounds by the pressure you apply to
the keys after the initial striking of the keys, for each individual key.
1.6 Pitch Bend
Pitch Bend messages are continuous controller messages that allow the
pitch of designated notes to be raised or lowered by a specified amount
over a specified duration.
CONTROLLER VALUE
Pitch Bend Change 0 (center)
Aftertouch 0 (off)
Modulation 0 (off)
Foot Controller 0 (min)
Expression 127 (max)
Hold1 0 (off)
Portamento 0 (off)*
Sostenuto 0 (off)
Soft Pedal 0 (off)
Portamento Control Cancels the Portamento source key number
RPN Number not specified; internal data will not change
NRPN
* In Performance mode, 1 (on).
Number not specified; internal data will not change
cCS2x_App 12/10/98 5:15 PM Page 75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS2X in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS2X

Yamaha CS2X User Manual - German - 78 pages

Yamaha CS2X User Manual - Dutch - 108 pages

Yamaha CS2X User Manual - French - 78 pages

Yamaha CS2X User Manual - Portuguese - 130 pages

Yamaha CS2X User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info