48728
74
Zoom out
Zoom in
Previous page
1/84
Next page
74
Appendix
1.2.23 RPN (Registered Parameter Number)
LSB (Control #100)
RPN (Registered Parameter Number)
MSB (Control #101)
Messages which offset, or add or subtract values from a Part’s pitch
bend sensitivity, tuning, or other parameter settings.
First send the RPN MSB and RPN LSB to specify the parameter
which is to be controlled. Then use 1.2.21 Data
Increment/Decrement to set the value of the specified parameter.
Note that once the RPN has been set for a channel, subsequent data
entry will be recognized as the same RPN’s value change. Therefore
after you use the RPN, you should set a Null (7FH, 7FH) value to
avoid an unexpected result.
The following RPN numbers can be received.
1.2.24 Channel Mode Messages
The following Channel Mode Messages can be received.
1.2.24.1 All Sounds Off (Control #120)
Clears all sounds currently sounding on the specified channel.
However, the status of channel messages such as Note On and
Hold On is maintained.
2nd BYTE 3rd BYTE MESSAGE
120 0 All Sounds Off
121 0 Reset All Controllers
123 0 All Notes Off
126 0 ~ 16 Mono
127 0 Poly
RPN MSB RPN LSB PARAMETER
00H 00H Pitch Bend Sensitivity
00H 01H Fine Tune
00H 02H Coarse Tune
7FH 7FH Null
NRPN MSB NRPN LSB
01H 08H
01H 09H
01H 0AH
01H 20H
01H 21H
01H 24H
01H 30H
01H 31H
01H 34H
01H 35H
01H 63H
01H 64H
01H 66H
14H rr
15H rr
16H rr
17H rr
18H rr
19H rr
1AH rr
1CH rr
1DH rr
1EH rr
1FH rr
24H rr
30H rr
31H rr
34H rr
35H rr
PARAMETER
Vibrato Rate
Vibrato Depth
Vibrato Delay
Low Pass Filter Cutoff Frequency
Low Pass Filter Resonance
High Pass Filter Cutoff Frequency
EQ Bass Gain
EQ Treble Gain
EQ Bass Frequency
EQ Treble Frequency
EG Attack Time
EG Decay Time
EG Release Time
Drum Low Pass Filter Cutoff Frequency
Drum Low Pass Filter Resonance
Drum EG Attack Rate
Drum EG Decay Rate
Drum Instrument Pitch Coarse
Drum Instrument Pitch Fine
Drum Instrument Level
Drum Instrument Panpot
Drum Instrument Reverb Send Level
Drum Instrument Chorus Send Level
Drum Instrument Variation Send Level
Drum High Pass Filter Cutoff Frequency
Drum EQ Bass Gain
Drum EQ Treble Gain
Drum EQ Bass Frequency
Drum EQ Treble Frequency
*rr=Note number for each drum voice instrument.
1.2.17 Portamento Control (Control #084)
Messages which apply a portamento between the currently-
sounding note and the subsequent note.
Portamento Control is transmitted specifying the note-on key of the
currently-sounding note.
Specify a Portamento Source Key number between 0 - 127.
When a Portamento Control message is received, the currently
sounding pitch will change with a Portamento Time of 0 to the next
note-on key on the same channel.
For example, the following settings would apply a portamento from
note C3 to C4.
90H 3CH 7FH C3 Note on
B0H 54H 3CH Source key number set to C3
90H 48H 7FH C4 Note on (When C4 is on, C3 is raised by a
portamento to C4.)
1.2.18 Effect1 Depth (Reverb Send Level)
(Control #091)
Messages which adjust the send level for the Reverb effect.
1.2.19 Effect3 Depth (Chorus Send Level)
(Control #093)
Messages which adjust the send level for the Chorus effect.
1.2.20 Effect4 Depth
(Variation Effect Send Level)
(Control #094)
Messages which adjust the send level for the Variation effect.
If Variation effect uses System effect, this message sets the send level
for the Variation effect. If it uses Insertion effect, this setting is
invalid.
1.2.21 Data Increment (Control #096)
Decrement (Control #097) for RPN
Messages which increase or decrease the MSB value of pitch bend
sensitivity, fine tune, or coarse tune in steps of 1. You are required
to assign one of those parameters using the RPN in the external
device in advance.
The data byte is ignored.
When the maximum value or minimum value is reached, the value
will not be incremented or decremented further.
(Incrementing the fine tune will not cause the coarse tune to be
incremented.)
1.2.22 NRPN
(Non-Registered Parameter Number)
LSB
(Control #098)
NRPN (Non-Registered Parameter Number)
MSB (Control #099)
Messages which adjust a voice’s vibrato, filter, EG, drum setup or
other parameter settings.
First send the NRPN MSB and NRPN LSB to specify the parameter
which is to be controlled. Then use 1.2.4 Data Entry to set the value
of the specified parameter.
Note that once the NRPN has been set for a channel, subsequent
data entry will be recognized as the same NRPN’s value change.
Therefore, after you use the NRPN, you should set a Null (7FH,
7FH) value to avoid an unexpected result.
The following NRPN numbers can be received.
cCS2x_App 12/10/98 5:15 PM Page 74
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS2X in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS2X

Yamaha CS2X User Manual - German - 78 pages

Yamaha CS2X User Manual - Dutch - 108 pages

Yamaha CS2X User Manual - French - 78 pages

Yamaha CS2X User Manual - Portuguese - 130 pages

Yamaha CS2X User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info