588665

Yamaha CP40 STAGE Manual

17
Zoom out
Zoom in
Previous page
1/60
Next page
CP4 STAGE/CP40 STAGE Owner’s Manual 17
Setting Up
Connecting Pedals
Two different types of pedal can be used with your stage
piano — foot switches, such as the bundled FC3 and the
optional FC4 and FC5, and a foot controller like the
optional FC7. Both are connected via the rear panel,
although the jacks used and the corresponding functions
differ as described below.
Foot switches
The FC3 Foot Switch that comes with your stage piano is
connected via the [SUSTAIN] FOOT SWITCH jack. It
functions in the same way as the damper pedal of an
acoustic piano, allowing notes played while it is operated
to sustain for longer than normal after you release the
corresponding keys.
The FC3 can also function as a half-damper pedal, and in
such a case, the damper effect will depend on the
degree to which the pedal is operated. You can activate
the half-damper playing technique as follows:
Press [UTILITY]; select 03: Controller using [u] and [d]
and press [ENTER]; set Sustain to “FC3 Half On” using
[-1/NO] and [+1/YES]; press [EXIT] several times to
return to the Performance screen (page 22).
An optional FC4 or FC5 Foot Switch can be connected
via the [ASSIGNABLE] FOOT SWITCH jack so that
various functions can be assigned to it. This allows you to
control the assigned parameter by foot.
NOTE Refer to the Reference Manual (pdf) for details on how to
assign a parameter to an FC4 or FC5 Foot Switch.
Foot controllers
Used to control an assigned parameter, an FC7 Foot
Controller (sold separately) is connected via the [1] and
[2] FOOT CONTROLLER jacks on the CP4 STAGE or via
the [FOOT CONTROLLER] jack on the CP40 STAGE. This
allows you to control assigned parameter(s) such as Part
volume(s) by foot.
NOTE Refer to the Reference Manual (pdf) for details on how to
assign a parameter to an FC7 Foot Controller.
Turning On and Off the
Stage Piano
Turning on
1
Ensure that your stage piano’s [MASTER
VOLUME] dial and the volumes of any
connected keyboard amplifiers or powered
speakers are turned fully down (i.e., to MIN or
0).
2 Set the [P] switch on the rear panel to the
On (O) position.
3 Turn on the keyboard amplifiers or powered
speakers.
Turning off
1
Ensure that the volumes of your stage piano
and any connected keyboard amplifiers or
powered speakers are turned fully down (i.e.,
to MIN or 0).
2 Turn off the keyboard amplifiers or powered
speakers.
3 On the CP4 STAGE, set the [P] switch on the
rear panel to the Off (N) position; on the
CP40 STAGE, set it to the Standby (N)
position.
CP4 STAGE
CP40 STAGE
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP40 STAGE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info