588665

Yamaha CP40 STAGE Manual

18
Zoom out
Zoom in
Previous page
1/60
Next page
18 CP4 STAGE/CP40 STAGE Owner’s Manual
Setting Up
Auto Power-Off
The Auto Power-Off function automatically turns off your
stage piano after a certain period of inactivity, which is
approximately 30 minutes by default.
If you would like to disable this function, turn off the stage
piano once and then turn it back on while holding down
the leftmost key on the keyboard. The message “Auto
power off disabled” will be displayed on-screen, and this
function will remain disabled until you set a new Auto
Power-Off time.
If necessary, use the following procedure to set the time
until the Auto Power-Off function turns off the stage piano.
Press [UTILITY]; select 01: General using [u] and press
[ENTER]; select AutoOff using [d]; set the desired time
using [-1/NO] and [+1/YES] or the Data Dial; press
[STORE].
NOTICE
• The stage piano remains charged and draws a small
amount of power even when turned off by the Auto Power-
Off function. To shut it down completely, therefore, unplug
it from the wall outlet.
• In certain modes of operation such as when data has been
edited, the Auto Power-Off function may not turn off the
stage piano when the set period of inactivity has elapsed.
We recommend, therefore, that you always turn off the
instrument manually when you are finished using it.
• If your stage piano is connected to other equipment such
as amplifiers, speakers, or a computer, but you do not
intend to use it for some time, we recommend that you
turn off all devices as described in their owner’s manuals.
Doing so eliminates the risk of damage to the other
equipment. If you do not want the stage piano to turn off
automatically when connected to other equipment, disable
the Auto Power-Off function.
• Any unsaved data will be lost when the Auto Power-Off
function turns off the stage piano. Be sure, therefore, to
store your work before it does so.
• If the stage piano’s AutoOff parameter is set to “off”, that
setting will be retained when you import system data that
was saved externally, regardless of the Auto Power-Off
setting contained in that data. If, however, a specific Auto
Power-Off time has been set using the AutoOff parameter
and system data is imported, the Auto Power-Off setting
contained in that data will be applied.
• It should be noted that executing the Factory Set function
(page 43) will cause the Auto Power-Off time to revert to
the default setting of 30 minutes.
NOTE
• Settings for the Auto Power-Off function do not represent exact
times and there may be some variation.
• When the Auto Power-Off function has turned off the instrument,
you will first need to return the [P] switch to the Off (N) position in
the case of the CP4 STAGE or the Standby (N) position in the
case of the CP40 STAGE before turning it back on.
Adjusting Volume and LCD
Contrast
While playing your stage piano, you can adjust the output
volume either on the instrument itself or via your keyboard
amplifiers or powered speakers. The stage piano’s
volume is adjusted using the [MASTER VOLUME] dial.
Set the instrument’s volume to close to 70% of the
maximum, and then raise the volume on the keyboard
amplifiers or powered speakers by an appropriate
amount.
NOTE The stage piano’s [MASTER VOLUME] dial cannot be used
to adjust the volume of audio being input via the [AUX IN]
jack (page 45).
CAUTION
To prevent hearing loss, avoid using headphones at high
volumes for extended periods of time.
If you find it difficult to read the on-screen text, you can
adjust the LCD contrast using the [-1/NO] and [+1/YES]
buttons with the [UTILITY] button held down.
NOTE The Contrast parameter on the General screen from the
Utility area can also be used to adjust the LCD contrast as
described above. Refer to the Reference Manual (pdf) for
details.
70%
LoudestQuietest
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP40 STAGE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info