588665
15
Zoom out
Zoom in
Previous page
1/60
Next page
CP4 STAGE/CP40 STAGE Owner’s Manual 15
Setting Up
Setting Up
Power Supply
CP4 STAGE
1
Ensure that the [P] (Power) switch on the
rear panel is set to the Off (N) position.
2 Insert the appliance end of the bundled
power cord (see below) into the [AC IN] jack,
also on the rear panel.
3 Plug the other end of the power cord into a
domestic-use, AC wall outlet.
NOTE Carry out this procedure in reverse order when
disconnecting the power cord.
WARNING
Use only the AC power cord supplied with your stage piano.
The use of an inappropriate replacement can lead to
overheating or electric shock.
WARNING
The power cord supplied with your stage piano must not be
used with other electrical equipment. Failure to observe this
precaution can result in the equipment being damaged or
lead to the outbreak of fire.
WARNING
Make sure your CP4 STAGE meets the voltage requirement
for the country or region in which it is being used. The power
cord includes a grounding pin to prevent electrical shock
and damage to the equipment. When connecting to an outlet,
connect the adaptors ground lead to the ground screw. If
you are unsure how to make this connection, contact your
Yamaha dealer or service center.
CAUTION
The stage piano remains charged and draws a small amount
of power even when the [P] (Power) switch is set to the Off
position. If it will not be used for an extended period of time,
therefore, be sure to unplug the power cord from the wall
outlet.
CP40 STAGE
1
Ensure that the [P] (Standby/On) switch on
the rear panel is set to the Standby (N)
position.
2 Connect the DC power cord from the bundled
power adaptor (see below) to the DC IN jack
on the rear panel.
3 Plug the adaptors AC power cord into a
domestic-use, AC wall outlet.
NOTE Carry out this procedure in reverse order when
disconnecting the power adaptor.
WARNING
Be sure to use only the power adaptor supplied with your
stage piano. Use of a different adaptor is inherently
dangerous and may result in equipment damage,
overheating, or the outbreak of fire.
WARNING
Make sure your CP40 STAGE meets the voltage requirement
for the country or region in which it is being used.
CAUTION
The stage piano remains charged and draws a small amount
of power even when the [P] (Standby/On) switch is set to the
Standby position. If it will not be used for an extended period
of time, therefore, be sure to unplug the power adaptor from
the wall outlet.
[P] switch
[AC IN] jack
DC IN jack
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP40 STAGE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP40 STAGE in the language / languages: English as an attachment in your email.

The manual is 14,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP40 STAGE

Yamaha CP40 STAGE User Manual - Dutch - 60 pages

Yamaha CP40 STAGE User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info