48724
105
Zoom out
Zoom in
Previous page
1/122
Next page
12. Use the Control Matrix to control the Sync
Pitch by key tracking.
With key tracking you can mellow out the Sync Pitch in
the upper range and bring out the grit in the lower
range.
In the VOICE SCENE SETUP menu, perform the
following operations:
• Press Set No [UP/DOWN] to display “Set 3” in the
LCD.
• Press Param [UP/DOWN] to display “Sync Pitch” in
the LCD.
• Press Source [UP/DOWN] to display “KyTrk” (Key
Track) in the LCD.
• Press Depth [UP/DOWN] to set a value of “Dp-18”.
Finally, let's adjust the PEG to add a harder attack to
the electronic piano sound. Press KNOB PARAMETER
GROUP switch [PEG/LFO].
• Turn CONTROL knob 1 and set the PEG Decay
parameter to about “+3”.
• Turn CONTROL knob 2 and set the PEG Depth
parameter to about “10”.
There are many other parameters you may
want to adjust to get just the right sound you
want. When you’re finished with the editing
process, perform a Voice Store operation to
store your creation. For information, see page
98.
Electronic Organ
First let’s create the fundamental sound…
1. Select a voice that you don't mind writing
over.
Perform a Type 1 (Normal) Voice Initialize operation.
2. Select the pulse wave for a basic organ
sound.
Press KNOB PARAMETER GROUP switch [VCO1]. Turn
CONTROL knob 1 to set the Wave parameter to
"pulse". Turn CONTROL knob 4 to set the Edge
parameter to a value of about “30”. This smooths out
the rough edge of the sound.
Press KNOB PARAMETER GROUP switch [SYNC/FM].
• Turn CONTROL knob 1 to set the Algorithm
parameter to “Sync+FMbth”, which enables the sync
and applies FM to both master and slave oscillators
of VCO1.
Other settings (except for “only FM”) will also produce effective results.
• Turn CONTROL knob 2 to set the Sync Pitch
parameter to a value of about “+17”.
3. Set up the VCO2 an octave down to add
fullness to the organ sound.
Press KNOB PARAMETER GROUP switch [VCO2].
• Turn CONTROL knob 4 to set the Edge parameter to
a value of about “40”.
• Turn CONTROL knob 2 to lower the Pitch parameter
to a value of “-12”, which is a full octave down.
Press KNOB PARAMETER GROUP switch [MIX/VCF].
• Turn CONTROL knob 2 to set the VCO2 Level to a
value of “127” so that the VCO2 can be heard.
• Turn CONTROL knob 1 to decrease the VCO1 Level
to a value of about “70”.
4. Add a rotary speaker effect to the organ
sound.
Set the [EDIT ROTARY] switch to the VOICE COMMON
menu.
• Press Vari EF/EQ Param [UP/DOWN] to display
“VarEF” in the LCD.
• Press Data [UP/DOWN] to select the “RotarySp”
effect.
• Press Vari EF Dry:Wet [UP/DOWN] to increase the
effect level to a value of about “D<W10”.
NOTE
105
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info