48724
107
Zoom out
Zoom in
Previous page
1/122
Next page
107
6. Apply vibrato to the voice.
Press KNOB PARAMETER GROUP switch [VCO1] and
press CONTROL knob 8 to display the Pmod Depth
(Pitch Modulation Depth) parameter in the LCD. Turn
the knob to set a value near “+20”. This applies the
vibrato effect to the voice when you play.
Next, let’s set up the vibrato to be applied by the
[MODULATION] wheel, in order to control the amount
of vibrato as you play. Change the Pmod Depth setting
back to “0”.
We’ll use one of the 16 sets in the Control Matrix to
assign the VCO1 Pitch Modulation Depth parameter to
the [MODULATION] wheel.
Set the [EDIT ROTARY] switch to the VOICE SCENE
SETUP menu.
• Press Set No [UP/DOWN] to display “Set 1” in the
LCD.
• Press Param [UP/DOWN] to display “VCO1
PmodDp” in the LCD.
• Press Source [UP/DOWN] to display “A.MW” in the
LCD.
You can also assign a Control Change number to the Source, by which to control
the Parameter. In this case the Control Change number must match the setting in
the UTILITY SETUP menu’s Control Device and Control Number.
You can control the vibrato of the VCO1 by moving the
[MODULATION] wheel. To further define the range of
vibrato control, press Depth [UP/DOWN] to set a
value of “Dp+20”.
7. Apply reverberation to the sound.
Set the [EDIT ROTARY] switch to the VOICE COMMON
menu, then press Dly/Rev EF Param [UP/DOWN] to
display “Rev Return” in the LCD. Press Data
[UP/DOWN] to set a value of about “30”.
There are many other parameters you may
want to adjust to get just the right sound you
want. When you’re finished with the editing
process, perform a Voice Store operation to
store your creation. For information, see page
98.
NOTE
Synth Lead
First let’s create the fundamental sound…
1. Select a voice that you don't mind writing
over.
Perform a Type 1 (Normal) Voice Initialize operation.
2. Set up the Sync Algorithm for a slow
movement of the sound.
Press KNOB PARAMETER GROUP switch [SYNC/FM].
• Turn CONTROL knob 1 and set the Algorithm
parameter to “Sync+FMbth”, which enables the sync
and applies FM to both master and slave oscillators
of VCO1.
Other settings (except for “only FM”) will also produce effective results.
• Turn CONTROL knob 2 and set the Sync Pitch
parameter to a value of about “+10”.
• Turn CONTROL knob 3 and set the Sync Pitch Depth
parameter to a value of about “+20”.
• Turn CONTROL knob 4 and set the Pitch Source to
“LFO1”.
3. Slow down the speed of the LFO1.
Press KNOB PARAMETER GROUP switch [PEG/LFO],
then press CONTROL knob 6 once to display the LFO1
Speed parameter in the LCD. Turn the knob to set a
value of about “8”.
4. Change the LFO1 wave.
Press CONTROL knob 5 once to display the LFO1
Wave parameter in the LCD. Turn the knob to select
"sine
↑↑", which shifts the entire wave above the 0 line.
This creates a more typical synth lead sound.
Next let’s tweak a few parameters to add extra
depth and dimension to the sound…
5. Set up the sound for portamento play.
In the [PEG/LFO] group, press CONTROL knob 4 to
display the Port (Portamento) Time parameter in the
LCD. Turn the knob to set a value of about "60".
If “– – –” is flashing alternately with the Port Time value in the LCD, this means
the portamento is turned off. To turn the portamento on, press the
[PORTAMENTO] switch once.
6. Set up the Synth Lead sound for legato play.
Set the [EDIT ROTARY] switch to the VOICE SCENE
SETUP menu and press Poly [UP/DOWN] to set the
Poly mode to “legat” (legato). Playing the keyboard
produces only a monophonic note, and you can slur
the lead notes into each other.
NOTE
NOTE
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info