48724
104
Zoom out
Zoom in
Previous page
1/122
Next page
104
Electric Piano
First let’s create the fundamental sound…
1. Select a voice that you don't mind writing
over.
Perform a Type 1 (Normal) Voice Initialize operation.
2. Set up the basic characteristics of the electric
piano.
Press KNOB PARAMETER GROUP switch [VCO1], then
press CONTROL knob 4 once to display the Edge
parameter in the LCD. Turn the knob to set a value of
about “50” to smooth out the sound.
Press KNOB PARAMETER GROUP switch [SYNC/FM].
• Turn CONTROL knob 1 to set the Algorithm
parameter to “Sync+FMbth”, which enables the sync
and applies FM to both master and slave oscillators
of VCO1.
Other settings (except for “only FM”) will also produce effective results.
• Turn CONTROL knob 2 to set the Sync Pitch
parameter to a value of about “+33”. The sound will
become very tinny.
3. Set up the VCO2 to fill out the sound.
Press KNOB PARAMETER GROUP switch [VCO2], then
press CONTROL knob 4 once to display the Edge
parameter in the LCD. Turn the knob to set a value of
about “50”.
Press KNOB PARAMETER GROUP switch [MIX/VCF],
then press CONTROL knob 2 to display the VCO2
Level parameter in the LCD. Turn the knob to set a
value of about “127” in order to hear the VCO2.
4. Fine-tune the AEG and VCA velocity
sensitivity.
Press KNOB PARAMETER GROUP switch [VCA].
• Turn CONTROL knob 3 to set the Sustain parameter
to a value of “0”.
• Turn CONTROL knob 2 to set the Decay parameter
to a value of about “83”.
• Turn CONTROL knob 8 to set the Vel Sens (Velocity
Sensitivity) parameter to about “+30”, to increase the
sensitivity level.
5. Fine-tune the FEG Sustain and Decay
parameters.
Press KNOB PARAMETER GROUP switch [VCF].
• Turn CONTROL knob 3 to set the Sustain parameter
to a value of about “40”.
• Turn CONTROL knob 2 to set the Decay parameter
to a value of about “85”.
NOTE
6. Set the VCF cutoff for a mellow EP sound.
In the [VCF] group, turn CONTROL knob 5 to set the
VCF Cutoff parameter to a value of about “70”.
7. Set the velocity senstivity of the filter.
In the [VCF] group, turn CONTROL knob 8 to set the
Vel Sens (Velocity Sensitivity) to a value of about
“+40”. This lets you bring out the highs with greater
playing strength.
8. Widen the sound with a chorus effect.
Set the [EDIT ROTARY] knob to the VOICE COMMON
menu. Press Vari EF Dry:Wet [UP/DOWN] and set a
value of about “D<W10”. (Chorus 1 is already set as
the current Variation Effect.)
9. Apply reverberation to the sound.
In the VOICE COMMON menu, press Dly/Rev EF
Param [UP/DOWN] to display “Rev Return” in the
LCD. Press Data [UP/DOWN] to set a value of about
“20”.
Next let’s tweak a few parameters to add extra
control and subtle dimension to the sound…
10. Set up the Control Matrix to control the AEG
Decay by key tracking.
With key tracking you can make the AEG Decay
quicker in the upper range and slower in the lower
range, for a more natural electronic piano sound.
Set the [EDIT ROTARY] switch to the VOICE SCENE
SETUP menu.
• Press Set No [UP/DOWN] to display “Set 1” in the
LCD.
• Press Param [UP/DOWN] to display “AEG Decay”
in the LCD.
• Press Source [UP/DOWN] to display “KyTrk” (Key
Track) in the LCD.
• Press Depth [UP/DOWN] to set a value of “Dp+ 9”.
11. Use the Control Matrix to control the FEG
Decay by key tracking.
With key tracking you can also make the FEG Decay
quicker in the upper range and slower in the lower
range, for a more natural electronic piano sound.
In the VOICE SCENE SETUP menu, perform the
following operations:
• Press Set No [UP/DOWN] to display “Set 2” in the
LCD.
• Press Param [UP/DOWN] to display “FEG Decay” in
the LCD.
• Press Source [UP/DOWN] to display “KyTrk” (Key
Track) in the LCD.
• Press Depth [UP/DOWN] to set a value of “Dp+ 5”.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info