48724
74
Zoom out
Zoom in
Previous page
1/122
Next page
Convenient Parameter Control
You can use the Control Matrix sets to assign a single
controller to control more than one parameter, or multiple
controllers to control the same parameter.
[Ex. 1]
One controller to control more than one parameter
[Ex. 2]
Multiple controllers to control the same parameter
Procedure For Using The Control Matrix
1. Select the Set No (1-16).
2. Select the Parameter you want to control.
3. Select the Source (controller) for the parameter
control.
4. Set the Depth value.
5. Repeat steps 1-4 to assign additional controller
sets.
For more information about the Control Matrix, the separate Data List book.
Set Param Source Depth
1 VCF Cutoff A.MW +20
2 VCF Cutoff A.RbX -10
Set Param Source Depth
1 VCF Cutoff A.MW +25
2 Resonance A.MW +30
74
Set No (Set Number)
The Set Number parameter lets you select Pitch Bend
Pitch Up and Down, the number of the Set (1-16), and
Common (1 and 2) parameter assignments.
Settings:
PB Pitch : Selects the Pitch Bend Up parameter for setting
the range over which the pitch bends up (above a value of
64) when rolling the Pitch Bend wheel between center and
maximum forward position (for the selected Scene).
PB Pitch : Selects the Pitch Bend Down parameter for
setting the range over which the pitch bends down (below a
value of 64) when rolling the Pitch Bend wheel between
center and maximum back position (for the selected Scene).
Set 1 ~ 16: Selects the Set Number to which you want to
assign Parameter, Source and Depth settings (for the selected
Scene).
Comn 1 ~ 2 (Common Set 1 ~ 2): Selects the Common
Set number to which you want to assign Parameter (Off,
Common Volume, Common Pan, Variation Parameter, Delay
Return, Reverb Return), Source and Depth settings (applied to
both Scenes).
Parameter
The Parameter setting determines which parameter is
assigned to the Set Number (1-16) or Common Set (1-
2). When Set No is set to “PB
” or “PB” you don’t
need to select the Parameter because these are the
parameters for Pitch Bend.
Settings:
For a list of Control Matrix parameters, see the separate Data
List book.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info