48724
76
Zoom out
Zoom in
Previous page
1/122
Next page
If Pan setting = “alt” or “rnd”:
The Separate setting adjusts the Pan separation range.
Higher values result in a wider separation. When the
value is set to maximum setting (“32”), then left, center
and right are completely separated.
The Separate function does not apply to the Vari EF Wet signals, so if the Wet
setting is too high, the Separate effect will be weakened.
Unison Detune
When UNISON mode is selected (see Layer mode,
page 22), multiple sounds are played, with the pitch of
each sound slightly detuned. Unison Detune adjusts the
detuning of the VCO1 pitch in fine increments, letting
you create an even thicker UNISON sound by
applying higher settings, but be careful not to apply
too much or you’ll change the basic pitch of the voice.
(This function only works when Layer mode is set to
UNISON, DUAL UNISON or SPLIT UNISON.)
Settings: 1 ~ 32
Layer
Layer parameter settings apply to the selected Layer
mode, and affect both Scenes. These settings are
stored as voice data. There are three parameters,
including Pan, Separate, and Unison Detune.
For more information about Layer modes, see page 22.
Pan
The Pan parameter sets the type of stereo panning, or
the way the sound moves between the left and right
speakers.
Settings:
off: When Layer mode is set to SINGLE (see page 22), Pan
control does not function. When set to DUAL, DUAL UNISON,
SPLIT or SPLIT UNISON, you can change the pan width for
Scene 1 and Scene 2 using the Separate function (see below).
alt (Alternate): Causes the sound to alternate between left,
right and center each time a key is played. Use the Separate
function to determine pan width.
rnd (Random): Causes the sound to move at random. Use
the Separate function to determine pan width.
Separate
The Separate parameter adjusts the amount of
amplitude between left and right outputs. The result
depends on Pan type setting (see above).
Settings: 0 (no effect) ~ 32
If Pan setting = “off”:
When Layer mode (see page 22) is set to SINGLE, the
panning will have no effect.
When Layer mode is set to UNISON, higher values create
a wider stereo dimension by separating the two to up to
five sounds. (Poly mode generates two sounds with each
key pressed, and Mono/Legato mode generates five
sounds with each key pressed.)
When Layer mode is set to DUAL/DUAL UNISON, or
SPLIT/SPLIT UNISON, higher values create a wider stereo
dimension by separating Scene 1 and Scene 2 sounds.
76
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info