48722

Yamaha A4000 Manual

266
Zoom out
Zoom in
Previous page
1/296
Next page
Effect Parameter List
266 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
67: AUTO PAN
1 LFO Frequency 0.0Hz — 39.70Hz Auto pan frequency
2 L/R Depth 0 — 127 Left/right depth of panning
3 F/R Depth 0 — 127 Front/rear depth of panning
4 PAN Direction L<>R, L>>R, L<<R, Lturn, Rturn, L/R Auto pan type (L<->R is sine wave, L/R is square wave)
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
68: DELAY + AUTO PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time 0.1 — 740.0ms Delay time
3 Feedback Level -63 — +63 Amount of feedback
4 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
5 Auto Pan Speed 0.0Hz — 39.70Hz Auto pan frequency
6 Auto Pan Depth 0 — 127 Panning depth
7 EQ Frequency 90Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Width 1.0 — 12.0 Width of the mid range area which the EQ will boost/cut
69: DELAY L,C,R
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L 0.1ms — 1480.0ms Length of left channel delay
3 Delay Time R 0.1ms — 1480.0ms Length of right channel delay
4 Delay Time C 0.1ms — 1480.0ms Length of center channel delay
5 Feedback Time 0.1ms — 1480.0ms Length of feedback delay
6 Feedback Level -63 — +63 Feedback amount
7 Delay Level C 0 — 127 Volume of center channel
8 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
9 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
70: DELAY L,R
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L 0.1ms — 1480.0ms Length of left channel delay
3 Delay Time R 0.1ms — 1480.0ms Length of right channel delay
4 Feedback Time 1 0.1ms — 1480.0ms Length of feedback delay 1
5 Feedback Time 2 0.1ms — 1480.0ms Length of feedback delay 2
6 Feedback Level -63 — +63 Amount of feedback
7 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
71: ECHO
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L1 0.1ms — 740.0ms Length of first delay of left channel
3 Feedback Level L -63 — +63 Amount of feedback for left channel
4 Delay Time R1 0.1ms — 740.0ms Length of first delay of right channel
5 Feedback Level R -63 — +63 Amount of feedback for right channel
6 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
7 Delay Time L2 0.1ms — 740.0ms Length of second delay of left channel
8 Delay Time R2 0.1ms — 740.0ms Length of second delay of right channel
9 Delay Level 2 0 — 127 Volume of second delay
10 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
11 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
12 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
72: CROSS DELAY
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L>R 0.1ms — 740.0ms Delay time from left (input) to right (output)
3 Delay Time R>L 0.1ms — 740.0ms Delay time from right (input) to left (output)
4 Feedback Level -63 — +63 Amount of feedback
5 Input Select L, R, L&R Input select
6 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
7 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
8 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
9 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
10 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
73: CONTROL DELAY(MONO)
1 Delay Time 0.1ms — 1480.0ms Delay time
2 Feedback Level -63 — +63 Amount of feedback
3 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
4 Delay transition rate 1 — 48 Selects the speed of delay time variation
5 Control Type Normal, Scratch Normal or scratch type setting
6 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
7 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
8 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
9 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
… 266 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info