48722

Yamaha A4000 Manual

264
Zoom out
Zoom in
Previous page
1/296
Next page
Effect Parameter List
264 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
53: PHASER1
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of phase modulation
3 LFO Depth 0 — 127 Depth of phase modulation
4 Phase Shift Offset 0 — 127 Phase shift offset value
5 Feedback Level -63 — +63 Level at which phaser output will be returned to the input (negative values invert the phase)
6 Stage 4, 5, 6, 7, 8, 9, 10, 11, 12 Number of phaser shifter stages
7 Diffusion mono/stereo Diffusion
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
54: PHASER2
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of phase modulation
3 LFO Depth 0 — 127 Depth of phase modulation
4 Phase Shift Offset 0 — 127 Phase shift offset value
5 Feedback Level -63 — +63 Level at which phaser output will be returned to the input (negative values invert the phase)
6 Stage 3, 4, 5, 6 Number of phaser shifter stages
7 LFOPhaseDifference -180deg — +180deg L/R phase difference in the modulation waveform (no difference at 0 deg)
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
55: TREMOLO
1 LFO Frequency 0.0Hz — 39.70Hz Modulation frequency
2 AM Depth 0 — 127 Amplitude modulation depth
3 PM Depth 0 — 127 Delay modulation depth
4 LFOPhaseDifference -180deg — +180deg L/R phase difference of the modulation waveform (no difference at 0 deg)
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
12 Input Mode mono/stereo Mono/stereo selection for the input
56: FLANGING PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and the effect sound
2 Flanger&Pan Speed 0.0Hz — 39.70Hz Delay modulation frequency
3 Flanger Depth 0 — 127 Delay modulation depth
4 Flanger Delay 0.1 — 180.0ms Delay time
5 Flanger Feedback -63 — +63 Feedback amount
6 FlgPan Delay 0.1 — 180.0ms Delay time
7 FlgPan Feedback -63 — +63 Feedback amount
8 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
9 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
10 Delay Time 0.1 — 270.0ms Delay time
11 Delay Feedback -63 — +63 Feedback amount
12 Delay Level 0 — 127 Delay level
13 AM Speed 0.0Hz — 39.70Hz Frequency of amplitude modulation
@14 AM Wave tri,sine,saw up,saw down Select amplitude modulation waveform
15 AM Depth 0 — 127 Amplitude modulation depth
@16 AM Inverse R normal,inverse Invert left/right phase of amplitude modulation signal
57: FLOW PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between delay sound and effect sound
2 Delay Time 0.1 — 650ms Delay time
3 Delay Time Ofst R 0 — -884 Offset of R ch delay time
4 Feedback Level -63 — +63 Feedback amount
5 FB Level Ofst R -63 — +63 Offset of R ch feedback
6 Feedback High Damp 0.1 — 1.0 Adjust the high range attenuation (lower values will cause the high range to decay faster)
7 FB Hi Damp Ofst R -0.9 — +0.9 Offset of R ch high damp
8 Delay Mod Speed 0.0Hz — 39.70Hz Delay modulation frequency
9 Delay Mod Depth 0 — 127 Delay modulation depth
10 Delay Dry/Wet 1 — 127 Balance between delay sound and effect sound
11 PreDelayPan Speed 0.0Hz — 39.70Hz Frequency of the pre-delay autopan
12 PreDelayPan Wave tri,sine Waveform of the pre-delay autopan
13 PreDelayPan Depth 0 — 127 Depth of the pre-delay autopan
14 Auto Pan Speed 0.0Hz — 39.70Hz Autopan frequency
15 Auto Pan Wave tri,sine Autopan waveform selection
16 Auto Pan Depth 0 — 127 Autopan depth
58: ROTARY SPEAKER
1 LFO Frequency 0.0Hz — 39.70Hz Rotation frequency of the speaker
2 LFO Depth 0 — 127 Depth of modulation produced by speaker rotation
3 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
4 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
5 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
6 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
7 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
8 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
9 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
… 264 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info