478471
27
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL 25
GPS OPERATION
(
REQUIRES OPTIONAL GPS ANTENNA UNIT
)
“Point” memory
The FTM-350 Series Transceiver has 16 “point” memories (four channels in each
of four groups), which store the position (Longitude/Latitude) and the date.
When your vehicle nears one of the “Point” memories, the “Nav” pop-up window
will open for ten seconds even if another page is being displayed.
You may customize the length of time the window opens via Set mode item “H03
NAVI POPUP” in the “NAVI” group. In addition, the “date” may be changed to a
place or name, using the following procedure:
1. Press the
[
PLIST
]
key to open the “Point” memory list.
2. Rotate the left side
[
DIAL
]
knob to select the “Point” memory “date” to be
changed.
3. Press the left side
[
DIAL
]
knob to show the detail data of the “Point” memory.
4. Press the left side
[
DIAL
]
knob again to enable editing of the stored data.
5. Rotate the left side
[
DIAL
]
knob to toggle the point alarm function ON/OFF.
When this selection is set to “OFF”, the “Nav” pop-up window does not open
even if your vehicle nears that “Point” memory location.
6. Press the
[
]
key to move the cursor to the “date” area, and then press the
[
CLR
]
key to clear previous data.
7. To enter the desired name, rotate the
left side
[
DIAL
]
knob to select a
character/number, and press the
[
]
or
[
]
key to move the cursor.
8. Press the
[
ENT
]
key to overwrite the date setting.
9. Press the
[
BCK
]
key to return to the “GPS” page, and then press the
[
NAVI
]
key again to initiate navigation.
Important Note: You cannot change the “Point” memory of the APRS station that
is designated as the destination.
Important Note
When the GPS Antenna Unit is first turned on, it may take several minutes to
complete a fix of your position. This is normal, as the GPS unit is downloding
“almanac” information from the GPS satellites.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info