478471
25
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL 23
BARO/ALTI PAGE OPERATION
The FTM-350 Series Transceiver can display the current Barometric Pressure and relative
changes in the pressure. Furthermore, when an optional FGPS-1 or FGPS-2
GPS Unit is
installed, the FTM-350 Series Transceiver can display the current altitude and relative
changes in the altitude.
First, enable the “BARO/ALTI” page, by pressing the
[
SET
]
key and choosing the “DIS-
PLAY” group. Then select the Set Mode item “C01 DISPLAY SELECT” and set the “BARO/
ALTI” page to ON. Press the
[
ESC
]
key three times to exit the Set Mode. See page 37.
To display the “Baro/Alti” Page, enable the “BARO/ALTI” page via Set Mode item “C01
DISPLAY SELECT” in the group, beforehand. See page 37.
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “BARO/ALTI” Page appears.
The current Barometric Pressure appears at the upper right of the display. A chart that
indicates the relative changes in the pressure (barometric chart) is presented in the left
half of the display. Additionally, if you install the optional GPS Unit, your current
altitude appears at the upper right of the display, and your current position (Longitude/
Latitude) appears at the lower right of the display.
2
Press the
[
SCALE
]
key to change the time scale of the barometric chart. Available
selections are “2H”, “6H”, “12H”, and “24H”.
3
Press the
[
ALTI
]
key to change the “barometric” chart to the “altitude” chart. You may
also change the time scale of the altitude chart by pressing the
[
SCALE
]
key.
4
To return to the “barometric” chart, press the
[
BARO
]
key.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio”
Page appears.
You may change the barometric and altitude measurement units via Set Mode item “G10
UNIT SELECT” in the “SYSTEM” group (see page 42).
: The
FGPS-2 GPS Unit requires CT-133 GPS Antenna Cable and CT-136 GPS An-
tenna Adapter.
1
23
4
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info