478471
26
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL24
GPS OPERATION
(
REQUIRES OPTIONAL GPS ANTENNA UNIT
)
When the optional FGPS-1 or FGPS-2
GPS Antenna Unit is installed, the transceiver
permits the display of your position (Longitude/Latitude).
Before beginning GPS operation, enable the “GPS” page via the Set Mode item “C01
DISPLAY SELECT” in the “DISPLAY” group. See page 35.
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “GPS” Page appears.
Your current position (Longitude/Latitude) appears at the upper right of the display,
and your current altitude and vehicle speed appears at the lower right of the display.
Additionally, your course direction (compass) displays in the left half of the display.
2
Press the
[
DISP
]
key to change the compass. Available selections are “Compass Rose
(North Up)”, “Compass Rose (Heading Up)”, and “Compass Tape”.
3
Press the
[
POINT
]
key to store the current position and date into the “Point” memory,
if desired. Available “Point” memories are in four groups, and there are four Channels
for each group.
4
Press the
[
PLIST
]
key to open the “Point” memory list. Rotate the left side
[
DIAL
]
knob to scroll the list and press the
[
BCK
]
key to close the list. You may delete an
unwanted point from the “Point” memory list by pressing the
[
DEL
]
key, if desired.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio”
Page appears.
You may change the measurement units of the altitude and vehicle speed via Set Mode item
G10 UNIT SELECT” in the “SYSTEM” group (see page 42), and also change the time
format via Set Mode item “I02 DATE&TIME FORMAT” in the “TIMER/CLOCK
group (see page 44).
: The
FGPS-2 GPS Antenna Unit requires CT-133 GPS Antenna Cable and CT-136
GPS Antenna Adapter.
1
3424
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info