674747
114
Zoom out
Zoom in
Previous page
1/140
Next page
Page 112 FT
DX
1200 OPERATING MANUAL
AGC GROUP
001 FAST DELAY
Function Sets the delay time for the $GC F$ST mode.
$vailable Values 0 a 4000 msec 0 msecstep)
'efault Setting 00 msec
002 MID DELAY
Function Sets the delay time for the $GC 0I' mode.
$vailable Values 0 a 4000 msec 0 msecstep)
'efault Setting 1000 msec
003 SLOW DELAY
Function Sets the delay time for the $GC SL2W mode.
$vailable Values 0 a 4000 msec 0 msecstep)
'efault Setting 4000 msec
004 AGC SLOPE
Function Select the gain curve of the $GC ampli¿er.
$vailable Values 1250$LSL23(
'efault Setting 1250$L
1250$L The $GC output level will follow a linear
response to the antenna input level, while
$GC is activated.
SL23( The $GC output level will increase at 110
the rate of the antenna input level, while
$GC is activated.
008 TFT LAYOUT
Function Set the positions of the freTuency display and
meter display.
$vailable Values TY3(1 TY3(
'efault Setting TY3(1
TY3(1 'isplays the freTuency display at the top of
the TFT display.
TY3( 'isplays the freTuency display below the S
32 meter and the 'S3 display.
009 DIMMER LED
Function Sets the indicator illumination level.
$vailable Values 1
'efault Setting
$djusts the illumination level of the indicator located
on the above of the 0ain Tuning 'ial knob. You may
observe the effects of the changes as you adjust the
level setting. The higher the setting, the brighter the
illumination becomes.
010 DIMMER TFT
Function Setting of the TFT display brightness level.
$vailable Values 0 a 1
'efault Setting 8
011 BAR DISPLAY SELECT
Function Selects one of three parameters to be viewed
on the Tuning 2ffset Indicator.
$vailable Values CL$5CW TU1(uTU1(
'efault Setting CW TU1(
CL$5 'isplays relative clari¿er offset.
CW TU1( 'isplays relative tuning offset between the
incoming signal and transmitted freTuency
while in CW operation.
uTU1( 'isplays the peak position of the optional
u
-TU1( ¿lter.
012 METER TYPE SELECT
Function Selects the meter display type.
$vailable Values $1$L2GB$5
'efault Setting $1$L2G
$1$L2G 'isplays relative clari¿er offset.
B$5 'isplays relative tuning offset between the
incoming signal and transmitted freTuency
while in CW operation.
013 BAR MTR PEAK HOLD
Function Selects the peak hold time of the B$5 meter.
$vailable Values 2FF0.1.0.0 sec
'efault Setting 2FF
014 ROTATOR START UP
Function Selects the starting point of your rotator
controller's indicator needle.
$vailable Values 0018070
'efault Setting 0
$dvice If the optional $ntenna 5otator is not
connected, this adjustment has no effect.
DISPLAY GROUP
005 MY CALL
Function 3rograms your Call Sign.
$vailable Values 0ax 1 characters
'efault Setting FT';100
006 MY CALL TIME
Function 3rograms the display period of your Call Sign.
$vailable Values 2FF a sec
'efault Setting 1 sec
007 VFO COLOR
Function Selects the VF2-$ freTuency background
color.
$vailable Values BLU( S.Y BLU ( G5((1
3U53L( 5(' 25$1G( G5$Y BL$C.
'efault Setting BLU(
MENU MODE
AGC start
114


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info