674747
115
Zoom out
Zoom in
Previous page
1/140
Next page
Page 113FT
DX
1200 OPERATING MANUAL
015 ROTATOR OFFSET ADJ
Function $djusts the indicator needle precisely to the
starting point set in menu item “
014 ROTATOR START
UP
.
$vailable Values -30 a 0 step)
'efault Setting 0
$dvice If the optional $ntenna 5otator is not
connected, this adjustment has no effect.
DVS GROUP
016 RX OUT LEVEL
Function Sets the audio output level from the optional
'VS-6 Voice 0emory Unit.
$vailable Values 0 a 100
'efault 0
$dvice
If the optional 'VS-6 Voice 0emory Unit is not
connected, this adjustment has no effect.
017 TX OUT LVL
Function Sets the microphone input level to the optional
'VS-6 Voice 0emory Unit
$vailable Values 0 a 100
'efault 0
$dvice
If the optional 'VS-6 Voice 0emory Unit is not
connected, this adjustment has no effect.
KEYER GROUP
018 F KEYER TYPE
Function Selects the desired keyer operation mode for
the device connected to the front panel .(Y jack.
$vailable Values 2FFBUG(L(.(Y$CS
'efault Setting (L(.(Y
2FF 'isables the front panel keyer “straight
key” mode for use with external keyer or
computer-driven keying interface).
BUG 0echanical “bug” keyer emulation. 2ne
paddle produces “dits” automatically, while
the other paddle manually produces “dahs”.
(L(.(Y Iambic keyer with $CS $utomatic Character
Spacing) disabled.
$CS Iambic keyer with $CS $utomatic Character
Spacing) enabled.
019 F CW KEYER
Function Selects the keyer paddle wiring con¿guration
for the .(Y jack on the front panel.
$vailable Values 1255(V
'efault Setting 125
125 Tip 'ot, 5ing 'ash, Shaft Ground
5(V Tip 'ash, 5ing 'ot, Shaft Ground
020 R KEYER TYPE
Function Selects the desired keyer operation mode for
the device connected to the rear panel .(Y jack.
$vailable Values 2FFBUG(L(.(Y$CS
'efault Setting (L(.(Y
2FF 'isables the rear panel keyer “straight
key” mode for use with external keyer or
computer-driven keying interface).
BUG 0echanical “bug” keyer emulation. 2ne
paddle produces “dits” automatically, while
the other paddle manually produces “dahs”.
(L(.(Y Iambic keyer with $CS $utomatic Character
Spacing) disabled.
$CS Iambic keyer with $CS $utomatic Character
Spacing) enabled.
021 R CW KEYER
Function Selects the keyer paddle wiring con¿guration
for the .(Y jack on the rear panel.
$vailable Values 1255(V
'efault Setting 125
125 Tip 'ot, 5ing 'ash, Shaft Ground
5(V Tip 'ash, 5ing 'ot, Shaft Ground
022 ELEKEY TYPE
Function Selects the operation mode of the internal
keyer.
$vailable Values (L(.(Y-$(L(.(Y-B
'efault Setting (L(.(Y-B
023 CW WEIGHT
Function Sets the 'ot'ash ratio for the built-in
electronic keyer.
$vailable Values 1) . a 4.
'efault Setting 3.0
024 BEACON TIME
Function Sets the interval time between repeats of the
beacon message.
$vailable Values 2FF1 a 40 sec 1 secstep)70 a
60 sec 30 secstep)
'efault Setting 2FF
MENU MODE
115


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info