674768

Yaesu FT2DR Manual

152
Zoom out
Zoom in
Previous page
1/173
Next page
152
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: CONFIG Menu Operations
Limit the time of a continuous transmission (TOT Function)
Set the transceiver to automatically return to receive mode after transmitting continuously
for a certain period of time. The TOT function limits inadvertent transmission of
unnecessary signals, and unwanted battery power consumption (time-out timer function).
1 Rotate the DIAL, then touch [20 TOT].
2 Rotate the DIAL to set the time for the transceiver to automatically return to receive
mode state in steps of 30 seconds.
OFF/30 SEC to 10 MIN
Selecting OFF disables the TOT function.
Remark The default setting: OFF (European version: 3 MIN)
Tips
• When the time-out timer function is active, a beep is emitted when a continuous transmission nears
the set time. About 10 seconds later, the transceiver returns to the receive mode.
• The TOT setting is retained until “OFF” is selected in step 2 above.
Setting the Frequency Selection Range for Operation in VFO Mode
VFO MODE Function
Sets the frequency tuning range while operating in VFO mode.
1 Rotate the DIAL, then touch [21 VFO MODE].
2 Rotate the DIAL to select the desired tuning range.
ALL Tuning continues to the next band when reaching the end of a band.
BAND Tuning continues to the other end of the current band when reaching
the end of the band.
Remark The default setting: ALL
Notifying a Call From a Remote Station by Vibration
Rotate the DIAL to select [22 VIBRATOR] to set the vibrator which notifies you of a call
from a remote station.
For details, see “Notification of a Call from a Remote Station by Vibration” on page 113.
Swapping the Dial Knob Functions
1
Rotate the DIAL, then touch [23 DIAL KNOB CHANGE].
2 Press the [CHANGE] key.
The VOL and DIAL knob functions are swapped.
Remark The default setting: the upper knob is DIAL.
… 152 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info