674768
150
Zoom out
Zoom in
Previous page
1/173
Next page
150
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: CONFIG Menu Operations
When the valid password is entered, the frequency display screen appears.
Remark If an invalid password is entered, the transceiver is turned off automatically.
Caution
If you have forgotten the registered password, carrying out all resetting allows you to turn on the
transceiver without entering the password.
It should be noted that performing all resetting resets (initializes) all information such as the information
registered to memory channels and various setting values.
It is recommended that the password be written down on paper.
Setting the PTT Delay Time PTT DELAY Function
Set a timed delay before actual transmission begins after is pressed.
1 Rotate the DIAL, then touch [13 PTT DELAY].
2 Rotate the DIAL to select the desired setting.
OFF/20ms/50ms/100ms/200ms
Selecting OFF disables the PTT delay time function.
Remark The default setting: OFF
Setting the ARS Function
RPT ARS Function
Enable or disable the automatic Repeater Shift operation ARS (Repeater operation is
initiated by tuning to the repeater frequency).
1 Rotate the DIAL, then touch [14 RPT ARS].
2 Rotate the DIAL to select the desired setting.
ON Enables the ARS function.
OFF Disables the ARS function.
Remark The default setting: ON
Setting the Repeater Shift Direction
RPT SHIFT Function
Set the TX frequency shift direction for repeater use.
1 Rotate the DIAL, then touch [15 RPT SHIFT].
2 Rotate the DIAL to select the desired setting.
SIMPLEX No TX frequency offset.
-RPT Shifts TX to a lower frequency.
+RPT Shifts TX to a higher frequency.
Remark The default setting differs depending frequency
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info