674768

Yaesu FT2DR Manual

151
Zoom out
Zoom in
Previous page
1/173
Next page
151
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: CONFIG Menu Operations
Setting the frequency offset for Repeater Shift
RPT SHIFT FREQ Function
Set the repeater shift offset frequency.
1 Rotate the DIAL, then touch [16 RPT SHIFT FREQ].
2 Rotate the DIAL to select the desired shift offset.
The offset frequency can be set in steps of 0.05 MHz between 0.000 MHz and 150.000
MHz.
Remark The default setting differs depending frequency
Disabling Receiver While No Signal Is Received
Receiver Battery Save Function
Sets the Receive OFF Battery save interval (sleep ratio) to reduce power consumption.
1 Rotate the DIAL, then touch [17 SAVE RX].
2 Rotate the DIAL to select the desired setting (the time interval for disabling the receiver
operation).
0.2 sec (1:1) to 1.0 sec (1:5) In steps of 0.1 second
to 1.0 sec (1:5) to 10 sec (1:50) In steps of 0.5 second
to 1.0 sec (1:50) to 60 sec (1:300 sec) In steps of 5 second
OFF
Selecting OFF disables this function.
Remark The default setting: 0.2 sec (1:1)
Changing the Frequency Step Manually
Rotate the DIAL to select [18 STEP] to set each frequency step, when the Dial Knob is
turned manually.
For details, see “Setting the Frequency Step” on page 47.
Setting Clock Time
Rotate the DIAL to select [19 DATE & TIME ADJ] to set the built-in clock time.
For details, see “Setting Clock Time” on page 43.
… 151 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info