674754
139
Zoom out
Zoom in
Previous page
1/156
Next page
Page 137FTDX9000D OPERATION MANUAL
MENU MODE
SOFT
SHARP
SHARP
WIDE
MEDIUM
FILTER PASSBAND
FILTER SHAPE
MODE-DAT GROUP
053. DATA IN SELECT
Function: Selects the data input to be used on the
PKT mode.
Available Values: DATA/PC
Default Setting: DATA
DATA:Uses the data input line which is connected to
the rear panel’s PACKET jack while using the
PKT mode.
PC: Uses the data input line which is connected to
the rear panel’s AUDIO IN jack while using the
PKT mode.
054. DATA GAIN
Function: Sets the data input level from the TNC to
the AFSK modulator.
Available Values: 0 ~ 255
Default Setting: 128
055. DATA OUT
Function: Selects the receiver to be connected to
the data output port (pin 4) of the PACKET jack.
Available Values: VFO-a/VFO-b
Default Setting: VFO-a
056. DATA VOX DELAY
Function: Adjusts the “VOX” delay (receiver recov-
ery) time on the PKT mode.
Available Values: 30 ~ 3000 msec
Default Setting: 300 msec
057. DATA VOX GAIN
Function: Adjusts the “VOX” gain on the PKT mode.
Available Values: 0 ~ 255
Default Setting: 128
MODE-FM GROUP
058. FM MIC GAIN
Function: Sets the microphone gain for the FM mode.
Available Values: MCVR/0 ~ 255 (FIX)
Default Setting: 160
When this menu is set to “MCVR,” you may adjust
the microphone gain using the front panel’s MIC knob.
059. FM MIC SELECT
Function: Selects the microphone to be used on the
FM mode.
Available Values: FRONT/REAR/DATA/PC
Default Setting: FRONT
FRONT: Selects the microphone connected to the
front panel’s MIC jack while using the FM
mode.
REAR: Selects the microphone connected to the
rear panel’s MIC jack while using the FM
mode.
DATA: Selects the microphone connected to pin 1
of the PACKET Jack while using the FM
mode.
PC: Selects the microphone connected to the
rear panel’s AUDIO IN 3.5-mm jack while
using the FM mode.
060. RPT SHIFT
(
28MHz
)
Function: Sets the magnitude of the repeater shift
on the 28 MHz band.
Available Values: 0 ~ 1000 kHz
Default Setting: 100 kHz
061. RPT SHIFT
(
50MHz
)
Function: Sets the magnitude of the repeater shift
on the 50 MHz band.
Available Values: 0 ~ 4000 kHz
Default Setting: 1000 kHz
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info