674754
137
Zoom out
Zoom in
Previous page
1/156
Next page
Page 135FTDX9000D OPERATION MANUAL
MENU MODE
MODE-AM GROUP
039. AM MIC GAIN
Function: Sets the microphone gain for the AM mode.
Available Values: MCVR/0 ~ 255 (FIX)
Default Setting: 160
When this menu is set to “MCVR,” you may adjust
the microphone gain using the front panel’s MIC knob.
040. AM MIC SELECT
Function: Selects the microphone to be used on the
AM mode.
Available Values: FRONT/REAR/DATA/PC
Default Setting: FRONT
FRONT: Selects the microphone connected to the
front panel’s MIC jack while using the AM
mode.
REAR: Selects the microphone connected to the
rear panel’s MIC jack while using the AM
mode.
DATA: Selects the microphone connected to pin 1
of the PACKET Jack while using the AM
mode.
PC: Selects the microphone connected to the
rear panel’s AUDIO IN 3.5-mm jack while
using the AM mode.
MODE-CW GROUP
041. F-KEYER TYPE
Function: Selects the desired keyer operation mode
for the device connected to the front panel’s KEY jack.
Available Values: OFF/BUG/ELEKEY/ACS
Default Setting: ELEKEY
OFF: Disables the front panel’s keyer (“straight
key” mode for use with external keyer or
computer-driven keying interface).
BUG: Mechanical “bug” keyer emulation. One
paddle produces “dits” automatically, while
the other paddle manually produces “dahs.”
ELEKEY: Iambic keyer with ACS (Automatic Char-
acter Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Char-
acter Spacing) enabled.
042. F-CW KEYER
Function: Selects the keyer paddle’s wiring configu-
ration of the KEY jack on the front panel.
Available Values: NOR/REV
Default Setting: NOR
NOR: Tip = Dot, Ring = Dash, Shaft = Ground
REV: Tip = Dash, Ring = Dot, Shaft = Ground
043. R-KEYER TYPE
Function: Select the desired keyer operation mode
for the device connected to the rear panel’s KEY jack.
Available Values: OFF/BUG/ELEKEY/ACS
Default Setting: ELEKEY
OFF: Disables the front panel’s keyer (“straight
key” mode for use with external keyer or
computer-driven keying interface).
BUG: Mechanical “bug” keyer emulation. One
paddle produces “dits” automatically, while
the other paddle manually produces “dahs.”
ELEKEY: Iambic keyer with ACS (Automatic Char-
acter Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Char-
acter Spacing) enabled.
044. R-CW KEYER
Function: Selects the keyer paddle’s wiring configu-
ration of the KEY jack on the rear panel.
Available Values: NOR/REV
Default Setting: NOR
NOR: Tip = Dot, Ring = Dash, Shaft = Ground
REV: Tip = Dash, Ring = Dot, Shaft = Ground
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info