478504

Yaesu FT-950 Manual

95
Zoom out
Zoom in
Previous page
1/132
Next page
Page 93FT-950 OPERATING MANUAL
Checking a Memory Channel’s Status
Before programming a channel into memory, you can check the current contents of that channel without the danger of over-
writing the channel accidentally.
MEMORY OPERATION
STANDARD MEMORY OPERATION
1. Press the
[
A
M
]
button momentarily.
The data stored in the currently selected memory chan-
nel will be displayed in the frequency field. However,
since you are only checking the contents of the memory
channel, your radio will not have moved to the memory
channel’s frequency.
2. Rotate the
[
CLAR/VFO-B
]
knob to select a different
memory channel. To exit from the Memory Check
mode, press the
[
A
M
]
button momentarily once more.
ADVICE:
While the Memory Check function is engaged, the
memory channel number will blink in the Multi-Dis-
play Window.
While operating in the VFO mode, using Memory
Check, you may store the current VFO frequency into
the selected memory by pressing and holding in the
[
A
M
]
button for one second (until the double beep).
Conversely, if you wish to write the contents of the
current memory into the VFO-A register, press and hold
in the
[
M
A
]
button for one second.
Erasing Memory Channel Data
1. Press the
[
V/M
]
button, if necessary, to enter the VFO
mode.
2. Press the
[
A
M
]
button. The data stored in the cur-
rently selected memory channel will be displayed in
the frequency field.
3. Rotate the
[
CLAR/VFO-B
]
knob to select the memory
channel that you would like to erase. The memory chan-
nel number appears in the Multi-Panel Window.
4. Press the
[
LOCK
]
button to erase the contents of the
selected memory channel.
ADVICE:
The FT-950 can not erase the memory channels “01”
(and “US1” through “US5”: U.S. version).
After erasure, only the memory channel number will
remain; the frequency data will disappear from the dis-
play.
If you make a mistake and wish to restore the memory’s
contents, just repeat steps (1) through (4) above.
[
A
M
]
Button
[
CLAR/VFO-B
]
Knob
[
A
M
]
Button
[
CLAR/VFO-B
]
Knob
[
LOCK
]
Button
[
V/M
]
Button
… 95 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info