478504
94
Zoom out
Zoom in
Previous page
1/132
Next page
Page 92 FT-950 OPERATING MANUAL
MEMORY OPERATION
STANDARD MEMORY OPERATION
The Standard Memory of the FT-950 allows storage and recall of up to 99 memories, each storing frequency, mode, and a
wide variety of status information detailed previously. Memories may be grouped into as many as six Memory Groups, and
additionally you get nine pairs of band-limit (PMS) memories along with five QMB (Quick Memory Bank) memories.
Memory Storage
1. Set the VFO-A up with the frequency, mode, and sta-
tus, the way you want to have it stored.
2. Press the
[
A
M
]
button momentarily (the current chan-
nel number will start blinking in the Multi-Panel Win-
dow); the contents of the current memory channel will
be shown on the frequency display field.
3. Rotate the
[
CLAR/VFO-B
]
knob to select the memory
channel onto which you wish to store the data. If you
have selected a channel on which data is already stored,
that frequency will appear on the display.
4. Press and hold in the
[
A
M
]
button for one second to
store the frequency and other data into the selected
memory channel. A double beep will confirm that you
have held the
[
A
M
]
button in long enough.
Memory Channel Recall
1. Press the
[
V/M
]
button, if necessary, to enter the
“Memory mode”. A memory channel number will ap-
pear in the Multi-Panel Window.
ADVICE:
If you cannot enter the “Memory mode”, check the
[
VFO-B
(
RX
)]
Indicator/Switch. If it is illuminated
green, press the
[
VFO-A
(
RX
)]
Indicator/Switch to
make the
[
VFO-B
(
RX
)]
Indicator/Switch go out, then
press the
[
V/M
]
button again.
2. Press the
[
MCH
]
button. The orange LED inside the
button will light up, indicating that you are ready to
recall a memory channel.
3. After pressing the
[
MCH
]
button, you may rotate the
[
CLAR/VFO-B
]
knob to select the desired memory
channel.
ADVICE:
To work within a particular Memory Group, press the
[
GRP
]
button (the imbedded LED will glow orange), then
rotate the
[
CLAR/VFO-B
]
knob to select the desired
Memory Group. Now press the
[
MCH
]
button (the im-
bedded LED will glow orange); you may now choose the
memory channel within the selected Memory Group.
Multi-Display Window
[
V/M
]
Button
[
VFO-A
(
RX
)]
Button
[
VFO-B
(
RX
)]
Button
[
MCH
]
Button
[
GRP
]
Button
[
CLAR/VFO-B
]
Knob
[
A
M
]
Button
[
CLAR/VFO-B
]
Knob
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info