478504

Yaesu FT-950 Manual

97
Zoom out
Zoom in
Previous page
1/132
Next page
Page 95FT-950 OPERATING MANUAL
MEMORY GROUPS
Memory channels may be grouped into as many as six convenient batches, for easy identification and selection. For ex-
ample, you might want to designate memory groups for AM BC stations, shortwave broadcast stations, contest frequencies,
repeater frequencies and PMS limits, or any other groupings you like.
Each memory group is capable of holding up to 20 memory channels (except Memory Group 01: it is 19 memory channels,
and the Group size is fixed). When a memory channel is grouped, the channel numbers change to correspond to the chart
below:
Memory Group Assignment
1. Press the
[
MENU
]
button to enter the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item “029
GENE MEM GRP”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle the
Menu item display between “029 GENE” and “MEM
GRP”.
3. Rotate the
[
CLAR/VFO-B
]
knob to set this Menu item
to “On” (the default setting is “OFF”).
4. Press and hold in the
[
MENU
]
button for one second
to save the new setting and exit. Operation will now be
restricted to the six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (4) above, choosing “OFF” in step (3).
ADVICE:
To avoid confusion, note that the PMS memory group and
the PMS memories “P1L” through “P9U” will be so des-
ignated.
MEMORY OPERATION
GROUP MEMORY “OFF”
01 ~ 19
20 ~ 39
40 ~ 59
60 ~ 79
80 ~ 99
P-1L/1U ~ P-9L/9U
US1 ~ US5
MEMORY CHANNEL NUMBER
GROUP MEMORY “ON”
1-01 ~ 1-19
2-01 ~ 2-20
3-01 ~ 3-20
4-01 ~ 4-20
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
US-1 ~ US-5
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
Choosing the Desired Memory Group
You may recall memories just within a particular Memory Group, if desired.
1. Press the
[
V/M
]
button, if necessary, to enter the
“Memory” mode.
ADVICE:
If you can not enter the “Memory” mode, check to see
if the transceiver is in VFO-B mode (the green
[
VFO-
B
(
RX
)]
Indicator/Switch is illuminated). If so, press
the
[
VFO-A
(
RX
)]
Indicator/Switch to return operation
to VFO-A. Now, press the
[
V/M
]
button to enter the
“Memory” mode.
2. Press the
[
GRP
]
button (located to the upper right of
the
[
CLAR/VFO-B
]
knob). The imbedded LED in-
side the switch will glow orange.
3. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
Memory Group.
4. Press the
[
MCH
]
button (just below the
[
GRP
]
but-
ton). The imbedded LED inside the switch will glow
orange.
5. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
Memory Channel within the Selected Memory Group.
ADVICE:
If no channels have been assigned to a particular Memory
Group, you will not have access to that Group.
[
V/M
]
Button
[
VFO-A
(
RX
)]
Button
[
VFO-B
(
RX
)]
Button
[
MCH
]
Button
[
GRP
]
Button
[
CLAR/VFO-B
]
Knob
… 97 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info