674724
24
Zoom out
Zoom in
Previous page
1/44
Next page
22 FT-70DR/FT-70DE Operating Manual
In / Out Display
When another station with the same DG-ID number is within the communication
range, a beep sounds and the "In" is displayed under the GM
(
Group Monitor
)
function icon, and the right side of the MODE/STATUS indicator lights in light blue.
When all the members are out of the communication range, "out" is displayed and the
MODE/STATUS indicator light is off.
When a signal from another member station is received, the call sign of the other sta-
tion is displayed on the LCD for about 10 seconds.
When the DG-ID transmit and receive are set to "00" in the factory default setting, all stations In/
Out of range may be received and are displayed, but the other stations that set their receive DG-
ID number to other than "00" may not be receiving your signals.
Displaying the information of the other station received by GM
(
Group Monitor
)
function
1. When receiving the signals with the same DG-ID number, press the
[
MODE
]
key to
reveal the other station information:
Depending on the model, the information such as the call sign of the other station,
latitude, longitude and so on may be displayed.
When receiving the signals of multiple stations, press the
[
MODE
]
key to display
the call sign of the other station, and then rotate the DIAL knob to select the other
stations to be displayed on the LCD.
Up to 24 stations may be displayed in order of their reception.
z
The FT-70DR/DE may not send its own location information because the FT-70DR/DE is not
equipped with the GPS function.
z
The position information is displayed only when the latitude and longitude information is
included in the signal of the other station.
z
The transceivers that may transmit position information with the GM function are as follows:
(
As of Nov. 2017
)
.
FTM-400XD / FTM-400D series, FTM-100D series, FT2D, FT1XD, FT1D, FT-991A / FT-991*
(
*: Latitude and longitude setting must be entered manually, or an external GPS device must be connected.
)
.
Switch by the [MODE] key
Select by the DIAL konb Select by the DIAL konb
Switch by the [MODE] key
Switch by the [MODE] key
Switch by the [MODE] key
Call Sign 1 Call Sign 2
Call Sign 24
Latitude
*
2
Longitude
*
2
Group Mode Display
(Automatically switching display)
GM information screen
Memory Tag Display
*1
Frequency DisplayOwn DG-ID Number Display
*
1:Memory tag display is displayed in the case of the
memory channel or the home channel setting the
memory tag.
*
2:
the Latitude and longitude are displayed only when position
information is included in the signal of the other station.
When the callsign or latitude/longitude is being displayed, the displayed station is given priority. So
even when another station is received the display is not changed. While using the callsign display
screen, rotate the DIAL knob to select another station display.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR Additional guide - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info