674724

Yaesu FT-70DR Manual

22
Zoom out
Zoom in
Previous page
1/44
Next page
20 FT-70DR/FT-70DE Operating Manual
4. To check whether or not other stations are operating within communications range,
press the
[
GM
]
key to turn the GM
(
Group Monitor
)
function ON.
• The other stations also need to turn the GM
(
Group Monitor
)
function ON.
• While operating with the GM
(
Group Monitor
)
function, “Operating Frequency”,
“GROUP” and “DG-ID number” are shown repeatedly on the LCD.
5. Press the
[
GM
]
key to turn the GM
(
Group Monitor
)
function OFF and return to the normal operation.
z
While setting the DG-ID number, pressing and holding the
[
HM/RV
]
key will set the transmit
and the receive DG-ID numbers to “00”.
z
If the receive DG-ID is set to a number other than “00”, only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to “00” except when communication is
desired only with group members.
z
The transmit and receive DG-ID default number is set to “00”.
Communicating only with the specific members by setting the DG-ID number except for “00”
Example Set the DG-ID number of to “50”
1. Press and hold the
[
MODE
]
key.
• The DG-ID number setting screen appears and the
transmit DG-ID number “T00” blinks.
• Rotate the DIAL knob to set the transmit DG-ID num-
ber to “T50”.
2. Press to the
[
MODE
]
key again to blink the receive DG-
ID number “R00”.
Rotate the DIAL knob to set the reception DG-ID num-
ber to “R50”.
3. Press and hold the
[
MODE
]
key or press the PTT switch to save the setting and re-
turn to normal operation.
Tuning to the same frequency and setting the same DG-ID for all the group members
will enable communication between the members and exclude other signals.
4. Press the
[
GM
]
key to turn the GM
(
Group Monitor
)
function ON and check whether or
not other stations that are operating on frequency, with the GM
(
Group Monitor
)
func
-
tion ON, and have the same GD-ID number setting, are in the communication range.
• The other stations also need to turn the GM
(
Group Monitor
)
function ON.
• During operating on the GM
(
Group Monitor
)
function, “Operating Frequency”,
“GROUP” and “DG-ID number” are shown repeatedly on the LCD.
5. Press the
[
GM
]
key to turn the GM
(
Group Monitor
)
function OFF and return to the normal operation.
z
While setting the DG-ID number, pressing and holding the
[
HM/RV
]
key will set the transmit
and the receive DG-ID numbers to “00”.
z
If the receive DG-ID is set to a number other than “00”, only signals with that DG-ID will be
received. Normally, set the receive DG-ID number to “00” except when communication is
desired only with group members.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR Additional guide - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info