674724
21
Zoom out
Zoom in
Previous page
1/44
Next page
19FT-70DR/FT-70DE Operating Manual
Using the convenient Digital C4FM feature
About the Digital Group ID
(
DG-ID
)
feature
1. Digital Group ID
(
DG-ID
)
function allows communications with only the specific group
members using the two-digit ID numbers. The desired DG-ID number from 00 to 99 is
set in advance by all the group members. This ID number may be set separately for
transmit and receive, when the same ID number is set for both transmit and receive,
only group members with the same ID number will be heard. This feature may be used
to communicate only with group members that have the same DG-ID number. The GM
function may also be utilized to automatically monitor whether or not group member
stations with the same DG-ID number are operating within communication range.
The DG-ID number 00 detects signals with all ID numbers. Normally setting the ID
number to “00” for both transmit and receive will permit reception of the signals from
all other stations using the digital C4FM mode, regardless of the transmit DG-ID
number settings of the other stations.
Also note that when the receive DG-ID number of your transceiver is set to a DG-ID
number other than “00”, received signals that do not have the same DG-ID number
may not be heard.
2. When accessing the C4FM digital repeater controlled by the DG-ID number, set the
transmit DG-ID number of the FT-70DR/DE to that of the repeater input. Even in that
case, if the receive DG-ID number of the FT-70DR/DE is set to “00”, all the downlink
signals from the repeater may be received.
Communicating with the DG-ID feature
z
Digital C4FM mode transceivers compatible with the DG-ID function are required in order to
utilize this function.
z
If the firmware is not compatible with the DG-ID function, update the latest firmware to use the
DG-ID function. The latest firmware is available on the YAESU website.
Setting the transmit and receive DG-ID number to “00” for communicating
with all other stations using C4FM digital mode
1. Press and hold the
[
MODE
]
key.
The DG-ID number setting screen appears and the
transmit DG-ID number “T00” blinks.
If the transmit DG-ID number is not set to “T00”, rotate
the DIAL knob to set “T00”.
2. Press to the
[
MODE
]
key again and the receive DG-ID
number “R00” will blink.
If the receive DG-ID number is not set “R00”, rotate the
DIAL knob to set “R00”.
3. Press and hold the
[
MODE
]
key, or press the PTT switch to save the setting and re-
turn to the normal operation.
The setting is complete.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR Additional guide - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info