674724
25
Zoom out
Zoom in
Previous page
1/44
Next page
23FT-70DR/FT-70DE Operating Manual
Repeater Operation
Communicating Via the Repeater
The transceiver includes an ARS
(
Automatic Repeater Shift
)
function which sets the re-
peater operation automatically when the receiver is tuned to the repeater frequency.
1. Set the downlink
(
output
)
frequency from the re-
peater.
2.
”, “ ”or “ ” lcons may automatically appear
above the frequency.
3. Speak into the microphone while pressing and
holding the PTT switch.
Repeater shift icon
Tone encoder icon
The reverse state
The “reverse” state temporarily reverses the transmit and receive frequencies. This
allows checking to find if direct communication with the other station is possible.
1. When the ARS in ON, press the
[
HM/RV
]
key.
The transmit and receive frequencies are tem-
porarily reversed
(
reverse” state
)
.
In the “reverse” state, the “
” or blinks on
the LCD.
2. Press the
[
HM/RV
]
key to exit from the “reverse” state.
z
The repeater settings may be changed from the Set Mode.
Set Mode
[
46 RPT.FRQ
]
: Allows changing the repeater shift offset.
[
F
]
key →
[
0
]
(
RPT
)
key: Allows setting the repeater shift direction.
[
F
]
key →
[
6
]
(
CODE
)
key: Allows setting the tone encoder frequency.
z
The ARS function may be set to OFF in the Set Mode
[
45 RPT.ARS
]
.
The Yaesu DR-2X/XE repeater incorporates the DG-ID feature, which may limit
access to the repeater by using a two-digit 01 to 99 ID number. Multiple DR-2X/XE
repeaters, connected via the Internet may also be managed using the DG-ID num-
bers. To access a specified DR-2X/XE repeater, or DR-2X/XE repeater group, that
requires a DG-ID, the FT-70DR/DE transmit DG-ID must be set/programmed ac-
cordingly. Also, when communicating via a DR-2X/XE repeater, set the receive DG-
ID number to “00”.
Tone Calling
(
1750 Hz burst tone
)
If your transceiver is FT-70DE
(
European version
)
, press and hold in the MONI/T-CALL
switch to generates the 1750 Hz burst tone to access the European repeater.
The transmitter will automatically be activated, and the 1750 Hz audio tone will be su-
perimposed on the carrier. Once the repeater has been accessed, release the MONI/
T-CALL switch, and use the PTT switch to activate the transmitter thereafter.
If needed, the FT-70DR
(
USA/Asian version
)
, may be set to access repeaters which re-
quire a 1750 Hz burst tone by setting the MONI/T-CALL switch to serve as a “Tone Call”
switch instead. To change the configuration of the MONI/T-CALL switch, use Set Mode
[
32 M/T-CL
] (
37
)
.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR Additional guide - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info