444588
62
Zoom out
Zoom in
Previous page
1/104
Next page
Page 60 FT-450 OPERATION MANUAL
M
EMORY
O
PERATION
Labeling Memories
You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in recollection of the
channel’s use (such as a club name, etc.). This is easily accomplished using the Menu mode.
REGULAR MEMORY OPERATION
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “
” icon will ap-
pear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “EXT MNU”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “
” icon will be blink-
ing.
4. Rotate the
[
DSP/SEL
]
knob to select “ON” to ex-
pand the menu items.
5. Press the
[
DSP/SEL
]
knob. The “
” icon re-
turns to appear continuously.
6. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
7. Recall the memory channel that you wish to ap-
pend a label.
8. Press and hold the
[
F
]
button for one second to
enter the Menu mode again. The “
” icon
will appear on the display.
9. Rotate the
[
DSP/SEL
]
knob to select the menu
item “MEM TAG”.
10.Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will blink,
and “MEM TAG” will be replaced with “TAG-OFF
11.Press the [F] button to display the previously stored
label (in the factory default, all memory channels
are stored with the memory channel number as
the label).
12.Rotate the
[
MAIN DIAL
]
knob to select the first
digit of the desired label.
13.Rotate the
[
DSP/SEL
]
knob one step clockwise
to move to the next character.
14.Repeat steps 12 and 13 to program the remain-
ing letters, numbers, or symbols of the desired
label. Seven characters may be used in the cre-
ation of a label.
15.If you make a mistake, rotate the
[
DSP/SEL
]
knob
counter-clockwise to move back the cursor, then
re-enter the correct letter, number, or symbol.
You may press the [CLAR] button to clear the cur-
rent digit label.
16.When you have completed the creation of the la-
bel, press the
[
DSP/SEL
]
knob. The “ ” icon
returns to appear continuously.
17.Press and hold the
[
F
]
button for one second to
save the new setting and return to normal opera-
tion.
In Memory mode operation, the display indicates the
channel numbers while selecting the memory chan-
nels, then the display will switch to the Alphanumeric
“Tag” (label) after two seconds.
[
DSP/SEL
]
Knob
[
MW/V/M
]
button
[
F
]
button
[
MAIN DIAL
]
Knob
[
CLAR
]
button
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info