444588
64
Zoom out
Zoom in
Previous page
1/104
Next page
Page 62 FT-450 OPERATION MANUAL
M
EMORY
O
PERATION
HOME CHANNEL MEMORIES
Two one-touch “Home” channels are available, for special frequencies you use often.
The HF band Special “Home” channel default is 29.300 MHz, FM. The 50 MHz band “Home” channel default is
51.000 MHz, FM.
Home Channel Recall
1. Press the
[
F
]
button, followed by the
[
HOME/RCL
]
button to recall the Home Channel on the band
group where you currently are operating (HF or
50 MHz). The “HOME” notation appears in the dis-
play.
2. Press the [F] button, followed by the
[
HOME/RCL
]
button to return to the previous-used frequency
(either a VFO or a memory channel).
The transceiver switches to VFO mode if either the
[
DSP/SEL
]
knob or
[
MAIN DIAL
]
knob is turned. (In
AM/FM modes the menu item “A&FDIAL” should be
set to “ON” for the
[
MAIN DIAL
]
to be active).
Home Channel Frequency Change
The factory default for the Home Channel is 29.300 MHz, FM for HF band and 51.000 MHz, FM for 50 MHz
band. You can re-program the Home Channel in a manner identical to that used for the regular memories:
1. In the VFO mode, select the desired frequency,
mode, and status the way you want to have it
stored.
2. Press the
[
F
]
button followed by the
[
MW/V/M
]
button.
The blinking current memory channel number will
be shown on the display, and the contents of the
current memory channel will be shown on the dis-
play.
If there is no action by you within 10 second from
releasing the
[
MW/V/M
]
button the Memory Stor-
age procedure is canceled.
The memory storage procedure is canceled un-
less you operate it within 10 seconds
3. Press the
[
HOME/RCL
]
button momentarily to
store the frequency and other data into the Home
Channel. A double beep will confirm that you have
held the
[
HOME/RCL
]
button in long enough.
[
DSP/SEL
]
Knob
[
HOME/RCL
]
button
[
F
]
button
[
MAIN DIAL
]
Knob
[
MW/V/M
]
button
[
F
]
button
[
HOME/RCL
]
button
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info