444588
60
Zoom out
Zoom in
Previous page
1/104
Next page
Page 58 FT-450 OPERATION MANUAL
M
EMORY
O
PERATION
REGULAR MEMORY OPERATION
The Regular Memory of the FT-450 allows storage and recall of up to 500 memories, each storing frequency,
mode, and a wide variety of status information detailed previously. Memories may be organized into as many as
ten Memory Groups, and additionally you get two pairs of band-limit (PMS) memories along with one QMB
(Quick Memory Bank) memory and two Home channels.
Memory Storage
1. In the VFO mode, select the desired frequency,
mode, and status the way you want to have it
stored.
2. Press the
[
F
]
button followed by the
[
MW/V/M
]
button.
The blinking current memory channel number will
be shown on the display, and the contents of the
current memory channel will be shown on the dis-
play.
If there is no action by you within 10 second from
releasing the
[
MW/V/M
]
button the Memory Stor-
age procedure is canceled.
The memory storage procedure is canceled un-
less you operate it within 10 seconds.
3. Rotate the
[
DSP/SEL
]
knob to select the memory
channel in which you wish to store the data. If you
have selected a channel on which data is already
stored, that frequency will appear on the display.
4. Press the
[
MW/V/M
]
button momentarily to store
the frequency and other data into the selected
memory channel. A beep will confirm that you have
held the
[
MW/V/M
]
button.
You may over write new data into a channel on which
data is already stored.
Memory Channel Recall
1. Press the
[
MW/V/M
]
button, if necessary, to enter
the Memory mode. A memory channel number will
appear in the display.
2. Rotate the
[
DSP/SEL
]
knob to select the desired
memory channel.
Advice:
To work within a particular Memory Group, press the
[
DSP/SEL
]
button. Then rotate the
[
DSP/SEL
]
knob
to select the desired Memory Group. Now press the
[
DSP/SEL
]
button again. You may now choose the
memory channel within the selected Memory Group.
[
DSP/SEL
]
Knob
[
MW
/V/M
]
button
[
DSP/SEL
]
Knob
[
MW
/V/M
]
button
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info