674793

Yaesu FT-257 Manual

27
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual 25
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key
to set this
to “
ALPHA
” (enabling
the alpha-numeric “Tag” display)
.
5. To display the frequency again, just repeat the above procedure.
6. When you have made your selection, press the
PTT
switch to save the setting and
exit to normal operation.
To display the frequency again on all memory channels, just repeat the above procedure,
rotating the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select “
FREQ
” in step 4 above.
2) Direct Setting:
1. Set the
FT-257
to the “MR” (Memory Recall) mode, and recall the memory channel
on which you wish to enable the alpha-numeric Tag.
2. Press and hold the
[
F/MW
]
key for one second.
3. To display the frequency again, just repeat the above procedure.
This procedure is only applied directly to the memory channel on which you are cur-
rently operating (all other memory channels are unchanged).
Memory Offset Tuning
Once you have recalled a particular memory channel, you may easily tune off that chan-
nel, as though you were in the “VFO” mode.
1.
With the
FT-257
in the “MR” (Memory Recall) mode, select the desired memory channel.
2. Press and hold the
[
REV
]
key for one second to activate the “Memory Tuning” fea-
ture. The Memory Channel number will be replaced by
“
tun
.” And if you have an alpha-numeric Tag displayed
on the memory channel, the display will automatically
revert to display of the operating frequency, so you can
navigate without having to enter the Menu to change the display conguration.
3. Rotate the
DIAL
knob, as desired, to tune to a new frequency. The synthesizer steps
selected for VFO operation will be the steps used during Memory Tuning.
4. If you wish to return to the original memory frequency, just press the
[
V/M
]
key mo-
mentarily. The display will revert to display of the alpha-numeric Tag (if any) that
may have originally appeared on the LCD.
5. If you wish to store a new frequency set during Memory Tuning, just press and hold
in the
[
F/W
]
key for one second, per normal memory storage procedure. The micro-
processor will automatically set itself to the next-available clear memory location,
and you then press
[
F/W
]
again to lock in the new frequency.
1) If you want to replace the original memory contents with those of the new frequen-
cy, be sure to rotate the DIAL knob to the original memory channel number!
2) Any required CTCSS/DCS changes, or repeater offset modications, must be done
before storing the data into the new (or original) memory channel location.
Memory Mode
honbun_130313.indd 25 2013/03/13 20:30:00
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info