674793

Yaesu FT-257 Manual

29
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual 27
4. To change to another Memory Bank, press and hold in the
[
V/M
]
key, rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select the new Memory Bank, then press the
[
V/M
]
key momentarily.
5. To exit from Memory Bank operation, select “
NOBANK
”
in step 4 above and then press
[
F/MW
]
. You are now in
the “standard” Memory Recall mode, without utilization
of the Memory Banks. The memories stored in the various
Banks will remain in those banks, however; you do not need to store them again.
Removing Memories from a Memory Bank
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold in the
[
V/M
]
key for one second, then press and hold in the
[
F/MW
]
key to remove the memory channel data from the Memory Bank.
Moving Memory Data to the VFO
Data stored on memory channels can easily be moved to the VFO, if you like.
1. Select the memory channel containing the frequency data to be moved to the VFO.
2. Press and hold the
[
V/M
]
key to activate the “Memory Tune” feature temporarily,
then press and hold in the
[
V/M
]
key for one second. The data will now have been
copied to the VFO, although the original memory contents will remain intact on the
previously-stored channel.
If a Split Frequency Memory channel was transferred, the TX frequency will be ig-
nored (you will be set up for Simplex operation on the Receive frequency).
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events, where a number of operators may be using the radio
for rst time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode:
1. Turn the radio off.
2. Press and hold in the
[
V/M
]
key while turning the radio on.
3. Rotate the
DIAL
knob to select the “
F5 M-ONLY
” option,
then press the
[
SET/ATS
]
key.
To return to normal operation, repeat the above power-on pro-
cedure.
Memory Mode
honbun_130313.indd 27 2013/03/13 20:30:02
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info