674793

Yaesu FT-257 Manual

26
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual24
Memory Mode
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to
aid in recollection of the channel’s use (such as a club name, etc.). This is easily accom-
plished using the Set Mode.
1. Recall the memory channel on which you wish to append
a label.
2. Press the
[
SET/ATS
]
key to enter the Set mode.
3. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 24:
MEM.TAG
.
4. Press the
[
SET/ATS
]
key momentarily to display the pre-
viously stored label (if any).
5. Press the
[
F/MW
]
key to clear any previous label.
6. Rotate the
DIAL
knob to select the rst digit of the desired
label.
7. Press the
[
F/MW
]
key to move to the next character.
8. If you make a mistake, press the
[
q
]
key to back-space
the cursor,
then re-enter the correct letter, number, or symbol.
9. Repeat steps 5 through 7 to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
10. When you have programmed a label which is under 6 char-
acters, press and hold in the
[
F/MW
]
key for one second
to conrm the label (if the label is exactly 6 characters in
length, you do not need to press and hold in
[
F/MW
]
key).
11. When you have completed the creation of the label, press
the
PTT
switch to save the label and return to the memory
recall mode.
Enable the Memory Alpha-Numeric Tag display
There are two methods to enable/disable the Alpha-Numeric Tag display. Set Mode Item
24 may be used to enable/disable the tags for all memory channels. Alternately, the tags
may be enabled/disabled directly for each memory channel individually.
1) Set Mode Setting:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 25:
NAME
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
honbun_130313.indd 24 2013/03/13 20:30:00
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info