478472

Yaesu FT-250R Manual

23
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL 19
MEMORY OFFSET TUNING
Once you have recalled a particular memory channel, you may easily tune off that chan-
nel, as though you were in the “VFO” mode.
c
With the FT-250R in the “
MRMR
MRMR
MR” (Memory Recall) mode, select the desired memory
channel.
d
Now press the
[
MR/MW
(
SKIP
)
]
key momentarily. The “
MRMR
MRMR
MR” indicator will be blinking.
e
Rotate the DIAL, as desired, to tune to a new frequency. The synthesizer steps selected
for VFO operation on the current band will be the steps used during Memory Tuning.
f
If you wish to return to the original memory frequency, press the
[
MR/MW
(
SKIP
)
]
key momentarily. The “
MRMR
MRMR
MR” indication will no longer be blinking.
g
If you wish to store a new frequency in the current or another memory. Just press and
hold the
[
MR/MW
(
SKIP
)
]
key for one second, select the new memory channel (if
desired), and press
[
MR/MW
(
SKIP
)
]
key again momentarily.
Any required CTCSS/DCS changes, or repeater offset modifications, must be done be-
fore storing the data into the new (or original) memory channel location.
HOME CHANNEL MEMORY
A special one-touch “HOME” channel is available, allowing quick recall of a favorite
operating frequency. Memory storage is simple to accomplish:
c
Change the setting of Menu Item #20 from “
REVREV
REVREV
REV” to “
HOMEHOME
HOMEHOME
HOME,” if it is not already set to
that option (see page 35).
d
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset.
e
Press and hold the
[
MR/MW
(
SKIP
)
]
key for 1/2 second.
f
While the memory channel number is blinking, just press the
[
REV
(
HM
)
]
key. The fre-
quency and other data (if any) will now be stored in the special HOME channel register.
g
To recall the HOME channel, press the
[
REV
(
HM
)
]
key momentarily while operating
in the VFO or MR mode.
LABELING MEMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set mode.
c
Recall the memory channel on which you wish to append a label.
d
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key, to enter the Menu mode.
e
Rotate the DIAL to select Menu #1 (“
ALPHAALPHA
ALPHAALPHA
ALPHA”).
f
Press the
[
F/L
]
key to enable changing of this Menu item.
g
Press the
[
F/L
]
key, then press the
[
F/L
]
key again, to begin entry of the Label.
h
Rotate the DIAL to select the first digit of the desired label. When you have made your
selection, press the
[
(
MHz
)
]
key momentarily to move to the next character.
i
Repeat the previous step to program the remaining letters, numbers, or symbols of the
Memory Operation
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info