478472

Yaesu FT-250R Manual

22
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL18
The FT-250R provides a wide variety of memory system resources. These include:
199 “Standard” memory channels, numbered “
11
11
1” through “
199199
199199
199.”
A Home channel, allowing storage and quick recall of one prime frequency.
Five sets of band-edge memories also known as “Programming Memory Scan” chan-
nels, labeled “
L1L1
L1L1
L1/
U1U1
U1U1
U1” through “
L5L5
L5L5
L5/
U5U5
U5U5
U5”
MEMORY STORAGE
c
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset.
d
Press and hold in the
[
MR/MW
(
SKIP
)
]
key for one second.
e
Within five seconds of releasing the
[
MR/MW
(
SKIP
)
]
key, rotate the DIAL to select
the desired memory channel number.
f
Press the
[
MR/MW
(
SKIP
)
]
key once more to store the frequency into memory.
g
You still will be operating in the “VFO” mode, so you may now enter other frequen-
cies, and store them into additional memory locations, by repeating the above process.
STORING INDEPENDENT TRANSMIT FREQUENCIES
(
“ODD SPLITS”
)
All memories can store an independent transmit frequency, for operation on repeaters
with non-standard shift. To do this:
c
Store the receive frequency using the method already described under MEMORY STOR-
AGE (it doesn’t matter if a repeater offset is active).
d
Turn to the desired transmit frequency, then press and hold the
[
MR/MW
(
SKIP
)
]
key for
one second.
e
Within five seconds of releasing the
[
MR/MW
(
SKIP
)
]
key, rotate the DIAL to select
the same memory channel number as used in step
c
above.
f
Press and hold the PTT switch. Then while holding the PTT switch in, momentarily
press the
[
MR/MW
(
SKIP
)
]
key once more (this does not key the transmitter).
Whenever you recall a memory which contains independently-stored transmit and re-
ceive frequencies, the “[–][
+
]” indication will appear in the display.
The “Odd Splits” feature permits setting TONE/DCS individually for transmit and re-
ceive. Briefly, press the [F/L] key, and then press the [2(CODE)] key. Rotate the DIAL
knob to select the TONE or DCS for receive. You can confirm the Transmit and receive
TONE/DCS by alternately pressing of the [REV(HOME)] key.
MEMORY RECALL
c
While operating in the VFO mode, press the
[
MR/MW
(
SKIP
)
]
key. The “
MRMR
MRMR
MR” indica-
tor will show that you are now in the Memory Recall mode.
d
Rotate the DIAL to select the desired channel.
e
To return to the VFO mode, press the
[
VFO
(
PRI
)
]
key.
An easy way to recall memories is to key in the memory channel number, then press
[
MR/MW
(
SKIP
)
]
.
For example, to recall memory channel #16, press
[
1
]
-
[
6
]
-
[
MR/MW
(
SKIP
)
]
.
Memory Operation
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info