478463

Yaesu FT-1900R Manual

59
Zoom out
Zoom in
Previous page
1/90
Next page
55FT-1900R OPERATING MANUAL
4. Rotate the DIAL knob to select “F” (representing DTMF
“#”: the first digit of the DTMF string).
5. Press the
[
LOW
(
A/N
)]
key momentarily to accept the first digit and move to the second
digit of the DTMF string.
6. Repeat the previous steps until you have completed the ac-
cess code (“#(F)1101D”).
7. If you wish to attach an alpha/numeric name “Tag” to the Internet Memory, proceed to
the next step; otherwise press and hold in the
[
MHz
(
SET
)]
key for one second to save
the setting.
8. Press the
[
MHz
(
SET
)]
key twice to enable programming of the name tag (the Internet
Memory register number will blink).
9. Press the
[
D/MR
(
MW
)]
key momentarily. The “--ALPHA--”
notation will appear on the display for 2 seconds, then the
Memory register number will blink again.
10.Press the
[
MHz
(
SET
)]
key momentarily. The first digit will blink.
11.Rotate the DIAL knob to select the first digit of the desired
label.
12.Press the
[
LOW
(
A/N
)]
key to move to the next character.
13.If you make a mistake, press the
[
REV
(
DW
)]
key to back-space the cursor, then re-enter
the correct letter, number, or symbol.
14.Repeat steps 11 and 12 to program the remaining letters,
numbers, or symbols of the desired label. A total of six char-
acters may be used in the creation of a label.
15.When you have finished programming the label (6 characters or less), press and hold in
the
[
MHz
(
SET
)]
key for one second to confirm the label.
16.Repeat steps 1 through 15 to store other access codes, if so desired.
17.Press the PTT switch to save the setting and exit to normal operation.
Operation (Accessing an FRG Node)
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “23 INT MD.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to set this Set Mode Item to
“FRG” (thus activating the “Other Internet Link System”
mode).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting.
4. Press the
[ ]
key momentarily to activate the Internet Con-
nection feature. The “Int” notation will appear at the right
of the frequency.
5. Rotate the DIAL knob while pressing the
[ ]
key to select the Internet Memory register
INTERNET CONNECTION FEATURE
FRG
(
“FRIENDS’ RADIO GROUP”
)
MODE
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info