478463

Yaesu FT-1900R Manual

58
Zoom out
Zoom in
Previous page
1/90
Next page
54 FT-1900R OPERATING MANUAL
The FT-1900R can be used to access a “node” (repeater or base station) which is tied into
the Vertex Standard WIRES™ (Wide-Coverage Internet Repeater Enhancement System)
network. Details may be found at the WiRES-II Web site: http://www.vxstd.com/en/
wiresinfo-en/. This feature may also be used to access other systems, as described below.
SRG
(
“SISTER RADIO GROUP”
)
MODE
1. Press the
[ ]
key momentarily to activate the Internet Con-
nection feature. The “Int” notation will appear at the right
of the frequency.
2. Rotate the DIAL knob while pressing the
[ ]
key to select the access number (DTMF
“0” ~ “9,” “A,” “B,” “C,” “D,” “E (),” “F (#)”) corre-
sponding to the WIRES™ node to which you wish to es-
tablish an Internet link (ask the node or repeater owner/operator if you don’t know the
access number in the network). Now press the PTT switch to exit from the selection
mode.
3. With the Internet Connection feature activated (as in step 1 above), the FT-1900R will
generate a brief (0.1 second) DTMF tone according to your selection in step 2. This
DTMF tone is sent at the beginning of every transmission to establish or maintain the
link to the local WiRES™ node operating in the SRG mode.
4. To disable the Internet Connection feature, press the
[ ]
key momentarily (the “Int”
notation will disappear from the display).
If other users report that you always have a DTMF “beep” at the beginning of
each transmission, and you are not operating in conjunction with Internet ac-
cess, disable this function via step (4) above.
FRG
(
“FRIENDS’ RADIO GROUP”
)
MODE
You may access other Internet Link Systems (including WiRES™ in the “FRG” mode) that
use a DTMF string for access.
Programming the FRG code
Load the DTMF tones which you wish to use for Internet-link access into a Internet Memory
register. For purposes of this example, we will use “#(F)1101D” as the access code (the “#”
key is denoted by the letter “F”).
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “25 INT.SET.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the Internet Memory
register (F0 ~ F9) into which you wish to store the access
code.
3. Press the
[
LOW
(
A/N
)]
key momentarily. The first digit will
blink.
INTERNET CONNECTION FEATURE
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info