587188

Xterra TR800 TREADMILL Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
TR800 Treadmill
15
Programmable Features
The TR800 offers seven factory preset-programs, two user dened programs and one
Manual program. Each preset program has a maximum speed level that is displayed when a
desired workout is chosen. The maximum speed that the particular program will achieve will
be displayed in the Speed window.
Also included are two user programs (User 1 and User 2) for custom workouts.
To Select and Start a Preset Program
1. Press the Prole key to select the program. (Manual, Hill, Fat Burn, Cardio, Strength, or
Interval) The display will prompt you through the programming or you can just press Start
to begin the program with default values.
2. If Enter was pressed, the Message Center will now be blinking a value, indicating your
Age (default is 35), or the Heart Rate window will now be blinking a value, indicating your
Age. Entering your correct age affects the Heart Rate programs. Use the + / - keys to
adjust, then press Enter.
3. The Distance window will now be blinking a value, indicating your weight.The Message
Center will now be blinking a value, indicating your weight (default is 150 lbs.). Entering
the correct body weight will affect the calorie count. Use the + / - keys to adjust, then press
Enter.
4. The Speed window will now be blinking, or the Message Center will now be blinking the
preset max speed of the selected program (3 mph or 5 kph). Use the Speed + / - keys
to adjust, then press Enter. Each program has various speed changes throughout; this
allows you to limit the highest speed the program can reach.The Speed window will now
be blinking the preset top speed of the selected program. Use the Up/Down keys to adjust,
then press enter. Each program has various speed changes throughout; this allows you to
limit the highest speed the program can reach.
5. The Message Center will be blinking a value, indicating Time (the default value is 20
minutes). You may use any of the + / - keys to adjust the time. After adjusting, or to accept
the default, press Enter. (Note: You may press Start at any time during the programming to
start the program).
You are now done programming data and may press Start to begin your workout or Enter to
go back one level to change data entered in the programming phase.
… 17 …


Need help? Post your question in this forum.

Forumrules
1

Forum

xterra-tr800-treadmill

Reset search

  • Speed sensor dirty from Sheetrock work done in house where is it locate and how do I clean it? Submitted on 28-3-2023 at 02:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xterra TR800 TREADMILL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR800 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info